lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-10-2008, 11:15 AM   #1
dans8555
Not Yet Wild
 
Join Date: Aug 2008
Location: Pittsburgh Pennsylvania
Posts: 26
Default Melix 212 wiring

We started getting further away from the Melix 212 refurb so I thought I should start new. Most of the battery cables are 4 ga, there were a few that were 6 ga that I plan to replace so all are 4 ga. I want to replace the other wiring from the board to the solinoid to the motor to the coils. Should the heavier cables that now look like a 8 or 6 ga be replaced with 4ga also, or just replace with the same ga?
dans8555 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Thread Tools
Display Modes


Similar Threads
Thread Forum
Melix golf cart runs slow up hill Melex


All times are GMT -5. The time now is 04:41 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.