|
07-07-2022, 11:13 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2017
Location: Wichita, KS
Posts: 8
|
No power with New 400A solenoid, Navitas conversion w Roy Pow 2009 YDRE
I have been running the Navitas controller and motor with the stock solenoid for 1.5 years now and decided on a recommendation to change to the MZJ 400 A. Wired it the exact same and it is dead. Here is the question!
Do I run the positive or negative 2ga off the pack to the solenoid? What goes to the solenoid and what goes to B-? I know the other side of the solenoid goes to the B+ on the controller. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-12-2022, 08:26 AM
|
#2 |
|
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,322
|
Re: No power with New 400A solenoid, Navitas conversion w Roy Pow 2009 YDRE
Battery positive to the solenoid, solenoid to B+ on controller. Battery negative to B- on controller.
|
|
|
|
|
08-16-2022, 12:50 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2017
Location: Wichita, KS
Posts: 8
|
Re: No power with New 400A solenoid, Navitas conversion w Roy Pow 2009 YDRE
Well it has been running but... know have a delay when I hit the gas pedal and the battery is overheating and shutting down after about 3 minutes running on the street.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need Help w/ a 48v '06 CCP 600amp/5kw Navitas Conversion & HD Solenoid | Electric Club Car | |||
| Navitas AC Conversion and software update 08 YDRE diagnostics | Electric Yamaha | |||
| 2012 YDRE No Power to Solenoid but Tow/Run Switch Works | Electric Yamaha | |||
| 2009 ydre solenoid replaced, still dies | Electric Yamaha | |||
| 2009 YDRE solenoid takes long time to drop out | Electric Yamaha | |||
Linear Mode
