Jakes 6" spindle lift and rear wheel spacers

[atr42flyer]

Anyone know what the correct rear wheel spacers I would need to get to even out the stance on my 1999 Ezgo TXT?

I put Jakes 6" spindle lift on it, and I want the rear tires to track behind the fronts.

I can always measure and guess but wanted to know if someone has already been there.

Thanks

[LVCJ]

That would depend on your wheels and what offset they are. The simple way is just measure your front wheels, outside to outside. Then measure the back wheels outside to outside. Subtract the back wheel measurement from the front wheel measurement and divide that number by 2. That number then would be the size of each spacer you would need to add to back wheels in order to bring them out to match your front.

[Helirich]

What he's is refuring to is the Jakes lift moves the front wheels/tires out. It doesn't matter what the offset on the wheels are or what tires he runs. (As long as their the same all around)

I have that same lift. Awhile back I was going to "even it out" with spacers. I believe I figured 2" spacers were the closest. I decided against it because spacers put a lot of stress on the wheel bearings. I allready have 24" tires that put a lot of stress on them. The bearings and axles are pretty wimpy on these things.

I still might do it. If you do, please post before and after pics.