|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-26-2016, 03:27 AM | #1 |
Getting Wild
Join Date: May 2016
Posts: 105
|
ezgo txt 48 fnr replacement needed?
Hey all. I have a 2012 ezgo txt 48. According to the chart up in the sticky a sepex PDS with the toggle in the dash. I have looked all around and see people having to replace there manual by the legs fnr as they upgrade controllers and motors. I haven't seen anything on if or how to replace my setup. So question is will I have to or will this setup hold whatever I throw at it. No more than a 500amp controller and motor of some sorts (undecided) thanks all
Matt |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-26-2016, 03:36 AM | #2 |
Getting Wild
Join Date: May 2016
Posts: 105
|
Re: ezgo txt 48 fnr replacement needed?
May have actually just answered my own question. Was looking at alltrax wiring diagram and looks like the toggle goes straight to the controller. I assume that would mean all the large voltage goes through the controller and the toggle is just sending a signal. So no replacement needed? Sorry if I am completely wrong
|
05-26-2016, 05:47 AM | #3 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,292
|
Re: ezgo txt 48 fnr replacement needed?
You are correct. No need to upgrade the F/R on a sepex (DCS, PDS on EZ-Go) drivetrain.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Needed EZGo Part Discontinued. Replacement thoughts? | Electric EZGO | |||
1987 Marathon Brake assembly needed or replacement part number | Gas EZGO | |||
controller replacement advice needed | Electric Yamaha | |||
Help needed to identify axle and locate replacement part | Gas EZGO | |||
36 volt motor replacement needed! | Electric Club Car |