|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-16-2016, 11:17 AM
|
#1 |
|
Gone Wild
 Join Date: Aug 2012
Location: Gilbert SC
Posts: 154
|
PDS beep code, 3-4
Hello all. Have a cart that won't go. Do here solenoid click when pushed and cart jumps ever so slightly. Maint mode and pedal pushed i hear 3-4 beeps. No beeps when just putting in maintenance mode other than to let me know its in. Looking through the tech manual didn't really help any. Hoping you guys have some suggestions here.
I haven't opened the cover to inspect the wires but will do so here in a bit. Assuming all is well there, next step? A little background with this problem child. 1st time it wouldn't go, replaced the controller with an used one and it worked. 2nd time two months later the Speed sensor wire damaged or unit failed. Replaced and operated fine Not no go again and this is the error code. Thanks for any and all suggestions! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-16-2016, 11:25 AM
|
#2 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: PDS beep code, 3-4
Check all connections at the motor and controller make sure they are tight.
|
|
|
|
|
06-16-2016, 11:44 AM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: PDS beep code, 3-4
3-4 is open field = 1 of 3 things I think
1. F1 or F2 wire bare and shorted (see below) 2. Motor failure 3. controller failure |
|
|
|
06-16-2016, 12:57 PM
|
#4 |
|
Gone Wild
Join Date: Aug 2012
Location: Gilbert SC
Posts: 154
|
Re: PDS beep code, 3-4
Thanks to both of you. Will take a closer look when I get home and report back.
Luv this place! |
|
|
|
|
06-17-2016, 08:58 AM
|
#5 |
|
Gone Wild
Join Date: Aug 2012
Location: Gilbert SC
Posts: 154
|
Re: PDS beep code, 3-4
Loose wire on the motor. Should have checked it first before coming here. First time I have ever seen that error code and guess I panicked. Thanks to you both!!!!!
|
|
|
|
|
06-17-2016, 01:50 PM
|
#6 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: PDS beep code, 3-4
3-4 code
Field winding open. Solenoid clicks, will not run. Check motor & controller field connections, replace power harness or motor, if required |
|
|
|
|
| Tags |
| 3-4 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Beep code to check for chip in PDS? | Electric EZGO | |||
| Low Voltage Beep Code | Electric EZGO | |||
| Reverse beep-beep-beep delete? | Electric EZGO | |||
| 01 Ez-go PDS 3/2 Beep code, Solenoid good | Electric EZGO | |||
| Constant beep and 5-2 error code | Electric EZGO | |||
Linear Mode
