|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-08-2017, 12:57 PM | #1 |
Not Yet Wild
Join Date: May 2017
Posts: 7
|
Ausco Disc Brakes - dragging on outside
Need help trouble shooting this install.
Pads are dragging hard on the outside pads with plenty of clearance on the inside. The only thing I can think of to fix this and leave the spacing from factory on the calipers would be to remove the 20mm washer between the new hub and axle bearing. The install directions say to leave factory however. Anyone else been here before? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-08-2017, 01:04 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Ausco Disc Brakes - dragging on outside
I have heard this before and removing the washer seemed to resolve the problem.
|
06-08-2017, 02:20 PM | #3 |
Not Yet Wild
Join Date: May 2017
Posts: 7
|
Re: Ausco Disc Brakes - dragging on outside
Any potential for damage to bearing or issues resulting from removing?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
4 wheel disc brakes dragging on my Club Car | Lifted Golf Carts | |||
G16+Ausco Disc Brakes | Gas Yamaha | |||
Will ausco disc brakes fit this rim? | Electric Club Car | |||
Ausco Disc Brakes | Announcements | |||
Jakes disc brakes dragging? | Lifted Golf Carts |