|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-23-2017, 07:30 PM | #1 |
Not Yet Wild
Join Date: Aug 2017
Location: Florence SC
Posts: 47
|
New SR4008400, 200solenoid and HD F/R switch
Finally got around to the install this weekend. Everything is going fine. Pictures were taken, wires and cables labeled all the tools out and ready to go.
I got everything apart and find the first road block..... a broken bolt in the backing plate, No big deal a have screw extraction kit. A little PB blaster and a few minutes later it was out. Mount the controller, install spades on the wires, install the solenoid everything is mocked up, no wires touching turn the key......... LED lights, solenoid clicks we have movement So I take everything apart to do some housekeeping and tidy up a bit. So its all back together and bolted down turn the key and no joy, no led, no click .....OMG After 2HRS of testing voltage, continuity, reading diagrams we found it..... A loose connection on one of the spades Check the connection with a slight tug! Everything is running well still not fast enough. I'll be ordering more stuff This is what I really need to know! I did a throttle test and this is what I did: Jacked the cart up. Pack charge is 38.1 Jumped from J4 to J5 using a digital meter here are the readings. 6.9 to start Led is on, solenoid clicks. WOT Voltage drops to 4.1. According to scottybs sticky this is not right. What are my next steps? Bax Last edited by SC_BAX; 10-23-2017 at 07:35 PM.. Reason: Missed words |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-25-2017, 08:39 PM | #2 |
Not Yet Wild
Join Date: Aug 2017
Location: Florence SC
Posts: 47
|
Re: New SR4008400, 200solenoid and HD F/R switch
I have been trying to figure out whats going on and I found this. See pic.
So when I open the cover the ITS is out of adjustment. Pic. I make some adjustments and take a measurement. Pic From B- to J4 (SR48400 controller) Throttle reads 7.4 on contact 5.4 WOT. Better A Noticeable increase in acceleration. Still at 10.8 to 11.2 MPH. Its like the gear is topping out.? I believe the controller and the other components are working fine. I have an email off to scottyb to ask for help also. New batteries last month Crown 220cr Fully charged. 36v TXT Anyone? |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reversing Switch, Directional Key Switch, & Starter Circuits | Gas Columbia ParCar | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |