|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-04-2018, 02:32 PM | #1 |
Not Yet Wild
Join Date: Jul 2017
Location: salem ohio
Posts: 29
|
36 volt ezgo
need some help on this and I no it has to be easy but have a 92 ezgo 36 volt and not sure if motor is good. when I hit pedal the selinoid clicks but nothing else. how do I go about jumping the motor to see if it works? also there is a small diode across wires and a big diode on large posts of solenoid do I need that big diode and if so where can I get it ? thanks for the help in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2018, 05:16 PM | #2 |
Not Yet Wild
Join Date: Jul 2017
Location: salem ohio
Posts: 29
|
Re: 36 volt ezgo
ok guys I got to where I did a complete voltage ck and I have 36 volts clear back to motor when I hit gas peddle in forward and reverse so is my motor shot ?
|
06-05-2018, 05:11 AM | #3 |
Gone Wild
Join Date: Sep 2017
Posts: 150
|
Re: 36 volt ezgo
How are you measuring at the motor? From terminal to terminal?
|
06-05-2018, 05:11 AM | #4 |
Gone Wild
Join Date: Sep 2017
Posts: 150
|
Re: 36 volt ezgo
Also is this a stock cart? I have a 1993 Ezgo and just redid the whole thing, so maybe I can help.
|
06-05-2018, 07:45 AM | #5 |
Not Yet Wild
Join Date: Jul 2017
Location: salem ohio
Posts: 29
|
Re: 36 volt ezgo
ty 420 for your response and yes its all stock. I used a volt meter and put ground on battery and tested the volts when I hit peddle both forward & rev. I cked ever point from solenoid to the controllers to computer and then to motor all is getting around 35 volts.
|
06-05-2018, 08:28 AM | #6 |
Gone Wild
Join Date: Sep 2017
Posts: 150
|
Re: 36 volt ezgo
Sounds like you may be right about the motor. I'd keep looking back on your thread here, you'll get some testing tips. Sounds like your testing it correctly.
|
06-18-2018, 10:11 PM | #7 |
Not Yet Wild
Join Date: Jun 2017
Posts: 22
|
Re: 36 volt ezgo
I have a '91 Marathon that we were having the same problems with. found the wire from to Pot to the microswitch were missing/broke. Replaced F/R switch & replaced the broken wires & it ran. But now I'm in the same boat after removing all lighting wiring. Not sure if my hubby "removed" needed wiring. He's not very good with wiring & he was not patient enough to wait for me!
|
06-19-2018, 03:18 PM | #8 | |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: 36 volt ezgo
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
just wondering how to put a 12 volt horn on a 36 volt ezgo cart | Electric EZGO | |||
42 volt EZGO Upgrade to 48 volt | Electric EZGO | |||
04 EZGO TXT - 6 volt batteries finally dead! 48 volt, here we come! | Electric EZGO | |||
placement when adding 2 more 6 volt batteries to 36 volt for 48 volt conversion | Electric Club Car | |||
ezgo 36 volt charger min volt for charge? | Electric golf carts |