![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Sep 2018
Location: South Georgia
Posts: 60
|
![]() Hello, I recently purchased a 2008 RXV that has Halogen lights installed. I bought the E-Z-Go RXV GTW Led Light Kit 32023 to replace the Halogens. Is it as simple as just swapping out the lights or do I need to install the new harness as well?
Thanks in advance. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Over This Interview Is...
![]() Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
![]() GTW 'not equal' Ezgo factory lights. I dont think it's plug & play.
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() Join Date: Oct 2008
Location: East Texas
Posts: 586
|
![]() So if the plugs aren't compatible, just cut and rewire in to fit your current plug. Shouldn't be a big deal. I wouldn't go to the trouble to replace the wiring harness if the halogen lights are currently working. I would be more worried that the lights will fit the current cutouts in the front.
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
![]() Join Date: Sep 2018
Location: South Georgia
Posts: 60
|
![]() I was pretty sure these were the same size. I did read where another brand wouldn't fit because it was smaller. I'll have to double check that first.
So if the connectors fit I'm good? If not change the connectors or swap out the harness. With my limited knowledge I was afraid there was maybe a resistor or something added since LED's work a little different. Thanks for the info. |
![]() |
![]() |
![]() |
#5 |
Gone Wild
![]() ![]() Join Date: Aug 2012
Location: Houma, Louisiana
Posts: 950
|
![]() I swapped my halogen's for LED, but used the replacement bulbs only. They were a straight plug and play install. Used same housings and wiring. Might be an option for you if your housings are a different size.
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
![]() Join Date: Sep 2018
Location: South Georgia
Posts: 60
|
![]() I thought about using LED bulbs, but I couldn't pass on the price for the kit that this guy bought new and never used.
How much of an improvement were the LED bulbs over stock? |
![]() |
![]() |
![]() |
#7 |
Over This Interview Is...
![]() Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
![]() I'm not saying they don't exist, but I have yet to see a led kit for Rxv that is better than the halogen bulbs.
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Forum | |||
Halogen to LED head lights | Electric EZGO | |||
3/4" LED's for tail lights? | Gas EZGO | |||
led lights use how much less amps than halogen | Big Block Talk! | |||
halogen lights | Electric Club Car | |||
12V Lights Halogen ? | Gas EZGO |