Club Car Nuts and Bolts

Mooncarter · 01-21-2019, 11:22 PM

Anybody know where to get the skinny bolts and nuts that hold the micro switches on to the FNR switch?

I have looked online, and can't match them up anywhere I have tried.

My stash of them is now depleted. Thanks for any help!

Fairtax4me · 01-22-2019, 12:32 AM

Dunno exactly what size those are. I’m not great at telling those tiny thread sizes apart.
Something like this may help if you can find one to measure. https://www.boltdepot.com/fastener-i...crew-Sizes.pdf

Mooncarter · 01-22-2019, 12:35 AM

Thanks fairtax. I'll have to print that out and hope I get the printed page the correct size for matching up. But yes, that should help a lot!

And yes I have one lone, rusty little orphan I can measure without taking one out of something!

Fairtax4me · 01-22-2019, 01:02 AM

Nice thing about those is they print a rule on the side so you can compare to a real ruler/ tape measure and make sure it’s accurate.
Those aren’t normally the kind of screws you find at Lowe’s, but worst case find a Fastenal or Grainger or something like that.
I used to have a bunch of screws in those sizes and some MUCH much smaller when I was into RC stuff, and used to buy all kinds of stainless steel hardware from a local fastener store. The guy probably thought I was crazy, but he always had what I was looking for no matter how tiny it was. Think of screws the size of the ones for eye glasses, except about 5 times longer, in stainless.

Mooncarter · 01-22-2019, 01:14 AM

Did you ever go to Pleasant's Hardware on Broad St. near the Blvd. in Richmond?

Could be a little pricy, but I never left there without any fastener I needed. Dang I miss that place.

lockman1 · 01-22-2019, 07:11 AM

#4-40 X 1-1/2" for 2 micro Gas

#4-40 X 2" for 3 micro Electric

TahoeDawgZ71 · 01-22-2019, 11:00 AM

I can get them from Club Car.

scottyb · 01-22-2019, 01:17 PM

You can get these cheap from https://www.mcmaster.com/

Mooncarter · 01-22-2019, 02:13 PM

Thanks for the help guys. Scotty I couldn't find the right length on their website.

I found them and the nuts on eBay. Worked out because I had some "eBay Bucks" that had to be used by the end of the month.

Thanks again everybody!

Goober11 · 01-22-2019, 02:52 PM

FYI Pleasants has closed on Broad St.http://www.pleasantshardware.com/locations/

01-21-2019, 11:22 PM	#1
Mooncarter Gone Insane Join Date: Oct 2016 Location: Richmond, VA Posts: 14,214	Club Car Nuts and Bolts Anybody know where to get the skinny bolts and nuts that hold the micro switches on to the FNR switch? I have looked online, and can't match them up anywhere I have tried. My stash of them is now depleted. Thanks for any help!

01-22-2019, 12:32 AM	#2
Fairtax4me Bonafide Nincompoop Join Date: Dec 2015 Location: Charlottesburg Va Posts: 8,987	Re: Club Car Nuts and Bolts Dunno exactly what size those are. I’m not great at telling those tiny thread sizes apart. Something like this may help if you can find one to measure. https://www.boltdepot.com/fastener-i...crew-Sizes.pdf

01-22-2019, 12:35 AM	#3
Mooncarter Gone Insane Join Date: Oct 2016 Location: Richmond, VA Posts: 14,214	Re: Club Car Nuts and Bolts Thanks fairtax. I'll have to print that out and hope I get the printed page the correct size for matching up. But yes, that should help a lot! And yes I have one lone, rusty little orphan I can measure without taking one out of something!

01-22-2019, 01:14 AM	#5
Mooncarter Gone Insane Join Date: Oct 2016 Location: Richmond, VA Posts: 14,214	Re: Club Car Nuts and Bolts Did you ever go to Pleasant's Hardware on Broad St. near the Blvd. in Richmond? Could be a little pricy, but I never left there without any fastener I needed. Dang I miss that place.

01-22-2019, 07:11 AM	#6
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,926	Re: Club Car Nuts and Bolts #4-40 X 1-1/2" for 2 micro Gas #4-40 X 2" for 3 micro Electric

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-22-2019, 01:02 AM	#4
Fairtax4me Bonafide Nincompoop Join Date: Dec 2015 Location: Charlottesburg Va Posts: 8,987	Re: Club Car Nuts and Bolts Nice thing about those is they print a rule on the side so you can compare to a real ruler/ tape measure and make sure it’s accurate. Those aren’t normally the kind of screws you find at Lowe’s, but worst case find a Fastenal or Grainger or something like that. I used to have a bunch of screws in those sizes and some MUCH much smaller when I was into RC stuff, and used to buy all kinds of stainless steel hardware from a local fastener store. The guy probably thought I was crazy, but he always had what I was looking for no matter how tiny it was. Think of screws the size of the ones for eye glasses, except about 5 times longer, in stainless.

01-22-2019, 11:00 AM	#7
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Club Car Nuts and Bolts I can get them from Club Car.

01-22-2019, 01:17 PM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Club Car Nuts and Bolts You can get these cheap from https://www.mcmaster.com/

01-22-2019, 02:13 PM	#9
Mooncarter Gone Insane Join Date: Oct 2016 Location: Richmond, VA Posts: 14,214	Re: Club Car Nuts and Bolts Thanks for the help guys. Scotty I couldn't find the right length on their website. I found them and the nuts on eBay. Worked out because I had some "eBay Bucks" that had to be used by the end of the month. Thanks again everybody!

01-22-2019, 02:52 PM	#10
Goober11 Gone Wild Join Date: Jun 2018 Location: Richmond,Virginia Posts: 547	Re: Club Car Nuts and Bolts FYI Pleasants has closed on Broad St.http://www.pleasantshardware.com/locations/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Battery fuse and bolts, nuts, washers	Electric EZGO
Identifying G16E Sun roof nuts and bolts	Electric Yamaha
wobble nuts (variance nuts) for 4x100 rim	Lifted Golf Carts
lug nuts same ez go, club car??	Electric EZGO
How to paint bolts and nuts that are seen	Body and Paint