lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-28-2019, 01:02 PM   #1
Flossnscott
Not Yet Wild
 
Flossnscott's Avatar
 
Join Date: Dec 2019
Posts: 33
Default 48v precedent does nothing

Hoping for some advice here. Just signed up and have a 2011 club car precedent. Was driving last week and it just stopped. When I put it in reverse it buzzed for a sec and stopped. No reverse, no forward. I plugged it into the charger and does not click on. Checked voltage and it reads 50ish volts. Forward reverse switch has power at it in forward and in reverse. Any advice on where to go from here would be awesome!


Sent from my iPhone using Tapatalk
Flossnscott is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-28-2019, 10:10 PM   #2
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: 48v precedent does nothing

(One wheel jacked up) Get your DVM and place the Black probe on the pack Neg and then with the key On, cart in Fwd, and Go Pedal depressed far enough to hear the microswitch click, take the Red probe and check to see if you have pack voltage in the following pins at the controller: Pin 5 - Lgt Blue (must be >30v), Pin 6 - Green, Pin 8 - Brown, Pin 9 - Grey, and Pin 10 - Tan.
NoleFan4Ever is offline   Reply With Quote
Old 12-28-2019, 10:11 PM   #3
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: 48v precedent does nothing

PS- Welcome!
NoleFan4Ever is offline   Reply With Quote
Old 12-28-2019, 11:49 PM   #4
Flossnscott
Not Yet Wild
 
Flossnscott's Avatar
 
Join Date: Dec 2019
Posts: 33
Default Re: 48v precedent does nothing

Ok great...thank you! I will check first thing in the morn. To be sure you mean the harness at the pedal?


Sent from my iPhone using Tapatalk
Flossnscott is offline   Reply With Quote
Old 12-29-2019, 10:09 AM   #5
Flossnscott
Not Yet Wild
 
Flossnscott's Avatar
 
Join Date: Dec 2019
Posts: 33
Default Re: 48v precedent does nothing

Good morning! So I am reading this again and I see you are saying harness at the controller. So that’s on the back of this board. There a truck to leaving this together and checking the pins? Seems like I can’t get to the harness at the controller without pulling that board out and going to the back of it that way.


Sent from my iPhone using Tapatalk
Flossnscott is offline   Reply With Quote
Old 12-29-2019, 01:49 PM   #6
Flossnscott
Not Yet Wild
 
Flossnscott's Avatar
 
Join Date: Dec 2019
Posts: 33
Default Re: 48v precedent does nothing

So I found the access panel in the back to leave the board in place. Was checking the solenoid and the two main terminal and the two smaller have pack power all the time soon as key is on? Was trying to check the controller wires but having a hard time telling the different colors..


Sent from my iPhone using Tapatalk
Flossnscott is offline   Reply With Quote
Old 12-29-2019, 02:00 PM   #7
Flossnscott
Not Yet Wild
 
Flossnscott's Avatar
 
Join Date: Dec 2019
Posts: 33
Default Re: 48v precedent does nothing

Nolefan4ever I should have added..I would count top left of plug to right and back probe these?


Sent from my iPhone using Tapatalk
Flossnscott is offline   Reply With Quote
Old 12-29-2019, 09:42 PM   #8
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: 48v precedent does nothing

Look at the White wire to identify Pin #1.

And yes, the access hatch is where you want to check.
Attached Images
File Type: png Excel Controller Pinout.PNG (31.8 KB, 0 views)
NoleFan4Ever is offline   Reply With Quote
Old 12-30-2019, 05:53 PM   #9
Flossnscott
Not Yet Wild
 
Flossnscott's Avatar
 
Join Date: Dec 2019
Posts: 33
Default Re: 48v precedent does nothing

Nolefan4ever. I checked all the pins. 5 has 0 voltage 6 has 50v as well as 8,9,and 10. Pin 6 gets voltage when pedal is depressed and 8,9,10 have it all the time. Hope this tells a story of absolute problem identification! Lol


Sent from my iPhone using Tapatalk
Flossnscott is offline   Reply With Quote
Old 12-30-2019, 07:22 PM   #10
Flossnscott
Not Yet Wild
 
Flossnscott's Avatar
 
Join Date: Dec 2019
Posts: 33
Default Re: 48v precedent does nothing

I should also add that my light on the dash does not come on.


Sent from my iPhone using Tapatalk
Flossnscott is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Rxv doesn’t run, controller? Electric EZGO
Ds solenoid doesn’t always go Electric Club Car
RXV doesn’t go Electric EZGO
Engine doesn’t want to cut off Gas Club Car
Sputters, Stalls & Sometimes Doesn’t Want to Move - 2010 Precedent Electric Club Car


All times are GMT -5. The time now is 01:17 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.