|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-01-2020, 06:15 PM
|
#1 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
2003 G22 unlock?
Is there anything you can do on a yamaha G22 to get more performance/speed? I had freedom chip on my ez go, but I am unaware of any hardware or software unlocks for these. Any ideas to get a little more speed, aside from larger tires.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-01-2020, 10:31 PM
|
#2 |
|
Gone Wild
 Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
2003 G22 unlock?
I think it depends on which controller you have. If you have a GE controller, I don’t think there’s anything you can do. I believe that the Moric controllers used in the later G 22‘s can have a PTV code programmed.
One of the Yamaha controller experts will confirm/correct this. |
|
|
|
|
03-01-2020, 11:04 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: 2003 G22 unlock?
Thank you. Let me also confirm my controller.
|
|
|
|
|
03-02-2020, 05:54 AM
|
#4 | |
|
Not Yet Wild
Join Date: Feb 2020
Location: Virginia
Posts: 44
|
Re: 2003 G22 unlock?
Quote:
|
|
|
|
|
|
03-02-2020, 09:57 AM
|
#5 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2003 G22 unlock?
Moric controller & Hitachi motor is the required combo for dealer installed speed code.(around 19 mph).
|
|
|
|
|
03-04-2020, 08:05 PM
|
#6 | |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 2003 G22 unlock?
Quote:
Exactly what I was thinking. |
|
|
|
|
|
03-05-2020, 04:03 PM
|
#7 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2003 G22 unlock?
A 2003 should have the GE controller, no speed code for GE controller.
|
|
|
|
|
03-05-2020, 06:52 PM
|
#8 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: 2003 G22 unlock?
Yeah no luck for me.
|
|
|
|
|
03-05-2020, 09:37 PM
|
#9 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2003 G22 unlock?
An alltrax controller would unlock speed for you. About 24mph with GE motor & about 22mph with ADC & Hitachi motor. Assuming you are running stock sized tires, bigger tires will be higher top speed.
|
|
|
|
|
03-05-2020, 10:19 PM
|
#10 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: 2003 G22 unlock?
I am just now lifting 6" and adding 23" tires. I do want to add an alltrax and larger solenoid.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48v passkey to unlock freedom mode | Electric EZGO | |||
| Rxv will not move, beep, or unlock brake. | Electric EZGO | |||
| "Freedom Mode" unlock for Danaher Handheld Service Tools | Electric EZGO | |||
| Speed control unlock | Electric EZGO | |||
| Unlock Club car 1989 | Gas EZGO | |||
Linear Mode
