|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-04-2020, 07:32 PM
|
#11 |
|
Cave Dweller
 Join Date: Apr 2013
Location: Always On The Move
Posts: 22,217
|
Re: Alltrax XCT 500 amp is awesome
my 48 volt ds had a 36 volt CC motor in it . it last 4+ years after the controller install before I melted the S1 stud off of it . the stock solenoid lasted another 3 years before that crapped out .
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-04-2020, 08:54 PM
|
#12 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: Alltrax XCT 500 amp is awesome
That is good to know. I know my motor gets hot but I do drive fast for extended periods doing some neighborhood cruising in the evenings.
|
|
|
|
|
04-05-2020, 08:18 AM
|
#13 |
|
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,217
|
Re: Alltrax XCT 500 amp is awesome
Run it to it burns up lol . what is hot 190°F or higher on the motor body ?
|
|
|
|
|
04-05-2020, 11:28 AM
|
#14 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: Alltrax XCT 500 amp is awesome
I'll have to check. I know it will burn my hand.
|
|
|
|
|
04-05-2020, 05:07 PM
|
#15 |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Alltrax XCT 500 amp is awesome
That is hot
 |
|
|
|
|
04-05-2020, 07:49 PM
|
#16 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: Alltrax XCT 500 amp is awesome
So I finally had a chance to ride today. I rode around 6 miles. At about 4 my cart would not go over 11 mph and had no torque. The motor felt very hot. Is it the motor or controller, your best guess? Batteries were still at 50.3v and everything else seemed normal. Just like it was almost in limp mode. However, letting it sit allowed me to go back into the 22 mph range. I am guessing the motor is very worn out? Worth taking it apart and replacing brushes and cleaning? I could just install the FSIP motor.
|
|
|
|
|
04-05-2020, 08:07 PM
|
#17 |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Alltrax XCT 500 amp is awesome
Yeah it’s overheating. Just get an aftermarket motor that can handle the high amperage.
 |
|
|
|
|
04-05-2020, 09:05 PM
|
#18 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: Alltrax XCT 500 amp is awesome
Thanks Jake. I will get on it asap. Frustrating but I knew it was in the cards.
|
|
|
|
|
04-05-2020, 09:14 PM
|
#19 |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Alltrax XCT 500 amp is awesome
The motor is the last piece of the puzzle. Then you can unleash all 500 amps from the controller.
 |
|
|
|
|
04-05-2020, 10:55 PM
|
#20 |
|
Gone Wild
Join Date: Oct 2019
Location: Houston, TX
Posts: 319
|
Re: Alltrax XCT 500 amp is awesome
OK, I got an FSIP 48VSPEEDEY motor. Should do pretty well? Also, where do I get field maps and what settings are best in the Alltrax?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Awesome people, just awesome! | Announcements | |||
| Plum Awesome | Electric EZGO | |||
Linear Mode
