Help 2013 EZGO blinker wiring issue

[meyre1]

How are the oem blinkers wired on a 2013 EZGO ls6? There wiring harness has been hacked up to the taillights. I can get the tail lights to work and blinkers to work but not the brake light. How is it wired in wired? With the headlights and tail lights or blinkers? the bulb has 2 separate filaments.

[meyre1]

Got everything working except when you turn on the right side blinker both rear taillights blink. Front blinker works correctly.

[BobBoyce]

Originally Posted by meyre1

Got everything working except when you turn on the right side blinker both rear taillights blink. Front blinker works correctly.

There is a jumper that needs to be removed that bonds both rear brake lights to the tail light circuit for ones without the factory turn signal w/harness. If yours is aftermarket, it is probably spliced in rather than being plugged into the socket that has the jumper plug in it. The brake light wire usually feeds into the turn signal unit so that the brake lights continue to operate normally, but in reverse, during turn signal use. In other words, the rear brake light blinks off when the front turn signal blinks on...