|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-29-2021, 10:39 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2021
Posts: 2
|
Measurements for 19 spline coupler on input shaft
I was wondering if anyone had one of these around they could measure for me, I’m looking for the ID of the splines inside the splines and on the splines.
I can’t post links or I would post a link to the part I’m talking about, buggiesunlimited sells them, just google 19 spline coupler |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-30-2021, 11:27 AM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Measurements for 19 spline coupler on input shaft
Here are the spline specs on my motor. Should be the same for any motor that couple to the Dana-Spicer differential that EZGO and others use.
|
|
|
|
|
03-30-2021, 09:34 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2021
Posts: 2
|
Re: Measurements for 19 spline coupler on input shaft
Thank you, that’s exactly what I needed.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| removal of 10 spline input shaft | Electric EZGO | |||
| 2010 TXT Input Shaft & Coupler Worn - Grinding | Electric EZGO | |||
| Whining Noise after input shaft & coupler replacement | Electric EZGO | |||
| 21 Spline Input Shaft needed - Anyone have them? Everyone is out | Electric EZGO | |||
| Looking for Clubcar 10 Spline input shaft | Golf Carts and Parts | |||
Linear Mode
