|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-04-2021, 10:01 AM | #1 |
Gone Wild
Join Date: Nov 2015
Posts: 479
|
Medalist F/R question
Have a medalist with the metal body that has the boot and small switch. Changed to a newer body and the switch isn’t long enough to go all the way through and connect? Suggestions on where to go from here?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2021, 10:35 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Medalist F/R question
Replace the F/R with a DPDT/Center-OFF toggle switch that has a neck long enough to go through the new body, or located elsewhere.
If the attached image of a early type DCS F/R switch is what you have, the attached drawing is how the wire a DPDT/Center-OFF switch. There other switch options. PDS rocker, CC, SPDT/Center-OFF with a diode. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
36 volt medalist - let me ask a better question | Electric EZGO | |||
Medalist question | Gas EZGO | |||
95 Medalist gas wiring question | Gas EZGO | |||
95 medalist body question | Gas EZGO | |||
'95 E-Z-Go Medalist accelerator question. | Electric EZGO |