|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-14-2021, 05:40 PM | #11 |
Getting Wild
Join Date: Mar 2021
Location: Ancient City
Posts: 112
|
Re: Parts needed to go 48V
Scotty has an upgrade kit that is old DS to sepex now. So regen with better braking,
Or go with an AC kit, also with regen and other stuff. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-14-2021, 06:44 PM | #12 |
Not Yet Wild
Join Date: Dec 2020
Location: Dunedin FL
Posts: 38
|
Re: Parts needed to go 48V
Hey WC53 I have ordered a bunch of extra pieces I was missing from Scotty. The problem is he wont sell you the pedal unless you buy the whole kit from him. I understand that this probably due to compatibility issues. I have ordered a D&D motor, 500AMP controller, 12V reducer, solenoid, diode, 12V busbar, battery meter, charger, and wire.
The only item im having a hard time finding is that throttle. Thank you, |
06-14-2021, 08:20 PM | #13 |
Getting Wild
Join Date: Mar 2021
Location: Ancient City
Posts: 112
|
Re: Parts needed to go 48V
I think he loads a specific throttle curve into the alltrax for his pedal. I could be nuts ;)
|
06-15-2021, 12:40 PM | #14 |
Not Yet Wild
Join Date: Dec 2020
Location: Dunedin FL
Posts: 38
|
Re: Parts needed to go 48V
I found a throttle that says it works with Alltrax controllers. Not sure about the voltage or wattage but check out the link below and let know if anyone has thoughts on this. Ive ordered it and hopefully it works.
https://www.cloudelectric.com/product-p/th-5v-ec.htm Thanks, |
06-16-2021, 10:13 AM | #15 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,173
|
Re: Parts needed to go 48V
Should work. Just need to change the throttle type on the controller.
|
07-07-2021, 08:37 AM | #16 |
Not Yet Wild
Join Date: Dec 2020
Location: Dunedin FL
Posts: 38
|
Re: Parts needed to go 48V
How would one go about changing the throttle type on the controller? Ive called a few local repair shops and they have no idea what im talking about
|
07-07-2021, 09:39 AM | #17 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,173
|
Re: Parts needed to go 48V
With your laptop connected to the controller open the Alltrax software and go to the Tools tab then open Options. Check the box for Edit throttle types. Select the one you want
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G9 parts needed | Golf Carts and Parts | |||
Parts Needed | Gas Club Car | |||
parts needed | Gas Club Car | |||
G2 parts needed | Golf Carts and Parts | |||
G1 parts needed. | Golf Carts and Parts |