|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-10-2021, 12:33 PM | #1 |
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Need help w/Gen IV Accusense Charger settings
I am trying to verify the mode setting on my 48v Gen IV DPI Accusense charger (see picture) is correct for my Duracell GC8 batteries (20 amp hour rate:165 and 5 amp hour rate:130)
According to DPI the setting is mode 4 for these batteries. https://www.buggiesgonewild.com/atta...6&d=1585916305 Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2021, 12:52 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help w/Gen IV Accusense Charger settings
|
08-10-2021, 02:38 PM | #3 |
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Re: Need help w/Gen IV Accusense Charger settings
Forgive my ignorance Kgsc, do I have it backwards? (3 right 4 & 5 left)
What about 1 and 2? I have rotated the photo to the correct orientation to help me understand. 1 is at the bottom |
08-10-2021, 02:42 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help w/Gen IV Accusense Charger settings
Page 6 in the manual. Up, up, up, down, down
Or in your case from the top, right, right, left, left, left. |
08-10-2021, 07:54 PM | #5 |
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Re: Need help w/Gen IV Accusense Charger settings
Thanks Kgsc, I made the changes.
|
08-14-2021, 05:38 AM | #6 |
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Re: Need help w/Gen IV Accusense Charger settings
These batteries are approx 3 1/2yrs old, will changing the profile make any difference or should I go back to the original profile?
|
08-14-2021, 10:56 AM | #7 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Need help w/Gen IV Accusense Charger settings
After looking harder. You were using mode 5 before which would be a better fit for your batteries due to the 165 ah rating. Mode 4 is too high a charge.
|
08-14-2021, 04:34 PM | #8 |
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Re: Need help w/Gen IV Accusense Charger settings
Thanks, I have moved the settings back to mode 5.
Not sure why I believed the original setting was mode 4 as I stated in my original post. Thanks again! |
|
|
Similar Threads | ||||
Thread | Forum | |||
DPI Accusense charger DIP settings | Electric Club Car | |||
DPI accusense 48v charger | Electric EZGO | |||
DPI Accusense charger settings for NAPA batteries | Electric EZGO | |||
Accusense DPI Charger | Electric EZGO | |||
DPI Accusense dip switch settings | Electric Club Car |