|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-19-2021, 09:54 AM | #1 |
Getting Wild
Join Date: Mar 2021
Posts: 83
|
RXV replace kingpin bushings
I have a 2018 RXV that I am working on upgrading front and back bushings.
I wanted to inspect and possibly replace the kingpin bushings. The bolt and nut that hold the kingpin bushings are impossible to budge. How do I remove this ? Replacing rear leaf spring bushings and a arm bushings made a huge difference in the squeaky suspension. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2021, 10:52 AM | #2 |
Gone Wild
Join Date: May 2021
Posts: 289
|
Re: RXV replace kingpin bushings
Usually a good air impact. If you dont have one, you would need a breaker bar and wrench.
|
11-19-2021, 09:41 PM | #3 |
Getting Wild
Join Date: Jun 2019
Location: Seattle
Posts: 103
|
Re: RXV replace kingpin bushings
Or a cordless electric impact. I use a 3/4” drive Milwaukee that will unscrew the Eiffel Tower from its base.
A stout impact, air or electric, is the way to go. |
11-20-2021, 09:27 AM | #4 |
Getting Wild
Join Date: Mar 2021
Posts: 83
|
Re: RXV replace kingpin bushings
Thanks, will look in to getting an impact wrench.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Precedent Front Bushing Install Issue - Bushings too wide for clevis and kingpin | Electric Club Car | |||
G9 kingpin removal & replace | Gas Yamaha | |||
Replace bushings in primary clutch | Gas Yamaha | |||
Leaf spring bushings, do they make polyurethane bushings? | Gas Club Car | |||
replace g2 kingpin with bolt | Lifted Golf Carts |