|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-09-2009, 07:40 PM | #1 |
Not Yet Wild
Join Date: Aug 2009
Location: Goldthwaite Tx
Posts: 24
|
Length of 4 gauge cable for a 36 volt TXT
I searched all over and could not find how much cable I should order to upgrade to 4 gauge so I went and looked at my cart and guessed.... well I guessed 5 ft short. So anyone needing this info for future reference here it is.... 25 ft of cable and 26 lugs to replace all your TXT cables with new 4 gauge welding cable. This is a 2006 model but I assume to 2001 or so up would be the same.
Tanner |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-09-2009, 08:00 PM | #2 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Length of 4 gauge cable for a 36 volt TXT
Part number 607317 on the shop ezgo site and you're done. $122.00 and free shipping. If you're set on making them yourself, I don't think 25 feet is enough? We don't make them anymorem as all our carts get the OEM sets...
|
|
|
09-09-2009, 08:02 PM | #3 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,290
|
Re: Length of 4 gauge cable for a 36 volt TXT
And to add to that, you can do it with 18 feet and 18 lugs on a PDS cart.
|
09-09-2009, 08:03 PM | #4 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Length of 4 gauge cable for a 36 volt TXT
|
|
|
09-09-2009, 08:06 PM | #5 |
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Length of 4 gauge cable for a 36 volt TXT
That sure seems like a lot of cable. I would have been more than 5' off.
|
09-09-2009, 08:07 PM | #6 | |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,290
|
Re: Length of 4 gauge cable for a 36 volt TXT
Quote:
Yes, Mike, they are, and they are very nice ones too compared to the other ones they supply. Keep them if you like, and save some cable and 4 lugs. I just like to have everything the same. It's a sickness..... |
|
09-09-2009, 08:10 PM | #7 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Length of 4 gauge cable for a 36 volt TXT
I second that......
Ooooops - did I just post that? |
|
|
09-09-2009, 08:12 PM | #8 |
Not Yet Wild
Join Date: Aug 2009
Location: Goldthwaite Tx
Posts: 24
|
Re: Length of 4 gauge cable for a 36 volt TXT
I ordered 20 ft and I am about 3 ft short to be exact. I am just trying to save a little cash where I can on this project especially on stuff like this I paid $55.90 shipped (should of cost about $60.00 had I ordered 25ft) for 20 ft of cable, 26 lugs and the swedge tool so I saved about $60.00.
|
09-09-2009, 08:13 PM | #9 | |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Length of 4 gauge cable for a 36 volt TXT
Quote:
|
|
|
||
09-09-2009, 08:25 PM | #10 |
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Length of 4 gauge cable for a 36 volt TXT
You did good then. The local tractor supply wants 3.49 a foot for 4g welding cable alone!
That's about 70.00 plus tax and then you still need lugs.. I didn't buy it. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Which 4 gauge cable set to use for 36V? | Electric Club Car | |||
Volt/power/batterg gauge? | Design Center | |||
Cable Length - Do-It-Yourself Cables | Electric Club Car | |||
volt gauge | Gas EZGO | |||
4 Gauge Cable Kit | Electric EZGO |