|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-19-2010, 12:56 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2010
Location: Livoni MI
Posts: 157
|
Hows it look? G9
I bought a G9 a month or so ago and wasnt supossed to do anything but drive it.... ya right. Guess my wife even knew better.
 I have ordered rear flip seat, light kit, heavy duty rear shocks, dash board, MP3 AMP kit, kick plate, fuse bank, and on and on. I am now in the process of installing a Tune-up kit and cleaning the engine area up. Before I did any cleaning I took a few pictures of the clutch area and was hoping you guys could help. I know very little about golf cart motors and wondered if anything looks out of the normal. As always really appreciate everyones help! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-19-2010, 06:34 PM
|
#2 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Hows it look? G9
Are all 3 (white plastic) ramp shoes on the secondary clutch there? I would take off the primary clutch cap and check for loose weights, if there loose, they will eventually "grenade"
 Once again...take the cap off and the drive belt, push the clutch toward the engine, zerk fitting a 12 o'clock, 1 maybe 2 shots of grease, rotate the zerk to 6 o'clock and wipe out any excess grease!!!!!!!!! |
|
|
|
|
08-19-2010, 08:04 PM
|
#3 |
|
Gone Wild
Join Date: Jul 2010
Location: Livoni MI
Posts: 157
|
Re: Hows it look? G9
All 3 white plastic ramps are there and all appears good so far. Its a little greasy but all screws seem tight. Had a pain with one of the cover screws that someone stripped. I assume I can clean off all the grease then apple through zerk.?.?
|
|
|
|
|
08-19-2010, 08:07 PM
|
#4 |
|
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Hows it look? G9
they look to be all there to me dave. can't see the 3rd one though and need to be cleaned a bit lol, other then a little grease in the primary and a little cleaning it looks good to me!
|
|
|
|
|
08-19-2010, 08:08 PM
|
#5 |
|
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Hows it look? G9
o didn't see primary pics! i'd clean the grease off the weights, it will collect dirt.
|
|
|
|
|
08-19-2010, 08:16 PM
|
#6 |
|
Gone Wild
Join Date: Jul 2010
Location: Livoni MI
Posts: 157
|
Re: Hows it look? G9
Cleaning it all up now. Is there any type of gasket that is susposed to go on with cover? Also, is the only place thats going to have grease is the shaft that weights\etc. slide on? All other grease can be cleaned up?
|
|
|
|
|
08-19-2010, 08:22 PM
|
#7 |
|
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Hows it look? G9
no and yes. in that order lol. no gasket, yes grease only on center/main shaft.
|
|
|
|
|
08-19-2010, 08:47 PM
|
#8 |
|
Gone Wild
Join Date: Jul 2010
Location: Livoni MI
Posts: 157
|
Re: Hows it look? G9
Coming along.....
|
|
|
|
|
08-19-2010, 09:09 PM
|
#9 |
|
Gone Wild
Join Date: Jul 2010
Location: Livoni MI
Posts: 157
|
Re: Hows it look? G9
I have 3 different types of grease...
1. Lithium All-Purpose Grease by LubriMatic #1-1/2, 2. Red"N"Tacky Grease by Lucas #2 (lithium, polymers, and anti-wear additive) says excellent for wheel bearings 3.X-tra heavy duty grease (says good for heavy duty equip and speed bearings). Any suggestion on which to use? |
|
|
|
|
08-19-2010, 09:29 PM
|
#10 |
|
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Hows it look? G9
Go lithium, others are way too heavy.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Hows It Do It | Gas Yamaha | |||
| ez-go controller box - hows it open?-97 | Electric EZGO | |||
Linear Mode
