|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-10-2011, 11:55 PM | #1 |
Not Yet Wild
Join Date: Mar 2011
Posts: 2
|
98' G16 jetting
Looking to re jet my cart. It runs lean on the main jet. Ive looked all over, and cant find any jetting specs or anyone that sells jets. It is the stock mikuni jn carb. What are some of you guys running for jetting? Ive got a modded exhaust and air box.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-11-2011, 08:52 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: 98' G16 jetting
First welcome, there has been much said about jetting on this site. Use search feature at top of page. Most of us here that have done jet work, have used torch tip cleaners, and have resized the stock jet. Kinda hard to just tell you what works at 5000'.
|
03-11-2011, 09:19 AM | #3 |
Not Yet Wild
Join Date: Dec 2009
Location: florida
Posts: 28
|
Re: 98' G16 jetting
i got a 112 jet from a honda jet kit in mine,im going to try a 114 next,2002 g16 with mod exhaust and airbox removed and a unifilter.
|
03-11-2011, 11:30 AM | #4 |
Not Yet Wild
Join Date: Mar 2011
Posts: 2
|
Re: 98' G16 jetting
That was what I figured I would have to do, but was hoping to find a bigger jet. And thanks to this site, I did find a place that sells the jet I was Looking for. Just kept looking ,after I posted this, and finally found what I was looking for...
|
Tags |
where to get jets? |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Jetting 91 G9 | Gas Yamaha | |||
need a jetting recommendation for a g16 | Gas Yamaha | |||
Water Jetting! | Design Center | |||
K&N and jetting questions? | Gas Club Car | |||
carb jetting | Gas Yamaha |