lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-06-2020, 01:51 PM   #1
FlaglerBeach
Not Yet Wild
Club Car
 
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
Default '08 precedent power to relay

Last night my cart stopped one mile away from home. I checked it out and it seemed like the small solenoid to the relay was loose. I giggled it and it managed to go once again. I thought that was the issue This morning it worked fine to move it to the other side of the garage, which I thought was odd. I put new ends on the wire and now it doesn't work at all.
The solenoid is not clicking or engaging. I checked this with my meter. I do not have any power when checking across the two solenoid terminals with the key on, in forward and run. If I leave one lead on and connect the other to the negative terminal I have power. Same on the other side.
Thanks in advance. I have tried to find the wiring diagram for my model but don't see it. I see every other one. Mine is the 2008 IQ Precedent.
FlaglerBeach is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-06-2020, 03:08 PM   #2
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,501
Default Re: '08 precedent power to relay

This drawing is for your cart.

What relay are you referencing?

Does the reverse buzzer come on when you select it?
Attached Images
File Type: jpg 2004-2008_Precedent_IQ.jpg (1.30 MB, 0 views)
NoleFan4Ever is offline   Reply With Quote
Old 06-06-2020, 03:44 PM   #3
FlaglerBeach
Not Yet Wild
Club Car
 
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
Default Re: '08 precedent power to relay

Quote:
Originally Posted by NoleFan4Ever View Post
This drawing is for your cart.

What relay are you referencing?

Does the reverse buzzer come on when you select it?
Thank you for your reply:

I have 6 -8volt batteries. Also my cart may be the early model of 08 Precedent. My controller is in the center and not on the back.
No Buzzer. The buzzer has never buzzed. The relay I am referring to is the main relay/solenoid the provides power to the controller. It as a blue wire on one side of the solenoid and a blue white on the other that goes to the 16 pin connector.
FlaglerBeach is offline   Reply With Quote
Old 06-06-2020, 05:13 PM   #4
FlaglerBeach
Not Yet Wild
Club Car
 
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
Default Re: '08 precedent power to relay

As I am looking over things and have my meter on the solenoid coil (run, forward and key on) and foot on the petal it goes click click about 8 times. Now is working. And after that not working once again. Ideas please!
FlaglerBeach is offline   Reply With Quote
Old 06-06-2020, 05:48 PM   #5
FlaglerBeach
Not Yet Wild
Club Car
 
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
Default Re: '08 precedent power to relay

So I am thinking MCOR but would like to test it first. Also mine may be the MCOR1 and not made anymore.
FlaglerBeach is offline   Reply With Quote
Old 06-06-2020, 07:18 PM   #6
R&TBabich
Gone Wild
Club Car
 
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
Default Re: '08 precedent power to relay

Quote:
Originally Posted by FlaglerBeach View Post
.... mine may be the MCOR1 and not made anymore.
Hasn't the MCOR1 been superseded by the MCOR4?
R&TBabich is offline   Reply With Quote
Old 06-07-2020, 12:04 AM   #7
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,501
Default Re: '08 precedent power to relay

Quote:
Originally Posted by R&TBabich View Post
Hasn't the MCOR1 been superseded by the MCOR4?
It has, but the early Precedent's had the MCOR2's and Group 1 pedal assembly.
NoleFan4Ever is offline   Reply With Quote
Old 06-07-2020, 12:08 AM   #8
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,501
Default Re: '08 precedent power to relay

Quote:
Originally Posted by FlaglerBeach View Post
Thank you for your reply:

I have 6 -8volt batteries. Also my cart may be the early model of 08 Precedent. My controller is in the center and not on the back.
No Buzzer. The buzzer has never buzzed. The relay I am referring to is the main relay/solenoid the provides power to the controller. It as a blue wire on one side of the solenoid and a blue white on the other that goes to the 16 pin connector.
Somebody converted you to 6x8v. That model cart came with 4x12's. The '08.5 came with 6x8's and moved the electronics to the back and were known as Excel/I2's.
NoleFan4Ever is offline   Reply With Quote
Old 06-07-2020, 12:15 AM   #9
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,501
Default Re: '08 precedent power to relay

Quote:
Originally Posted by FlaglerBeach View Post
As I am looking over things and have my meter on the solenoid coil (run, forward and key on) and foot on the petal it goes click click about 8 times. Now is working. And after that not working once again. Ideas please!
Quote:
Originally Posted by FlaglerBeach View Post
So I am thinking MCOR but would like to test it first. Also mine may be the MCOR1 and not made anymore.
Not sure if you have the Group 1 or 2 pedal assembly as it is probably an MCOR2 if a GPA1 and some 2's had them. To test the MS in the MCOR, since it could be your problem, take the 2-pin connector with the Blue and Green wire and remove it. Then install a paperclip or jumper in the connector and see if it runs correctly. If so, look here https://www.revolutiongolfcars.com/mcors and then call David. If not, we will look further...
NoleFan4Ever is offline   Reply With Quote
Old 06-07-2020, 06:51 AM   #10
FlaglerBeach
Not Yet Wild
Club Car
 
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
Default Re: '08 precedent power to relay

Quote:
Originally Posted by NoleFan4Ever View Post
Not sure if you have the Group 1 or 2 pedal assembly as it is probably an MCOR2 if a GPA1 and some 2's had them. To test the MS in the MCOR, since it could be your problem, take the 2-pin connector with the Blue and Green wire and remove it. Then install a paperclip or jumper in the connector and see if it runs correctly. If so, look here https://www.revolutiongolfcars.com/mcors and then call David. If not, we will look further...
Thank you for that test information. I tried that and still not working! I was hopeful!
FlaglerBeach is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
power to relay Gas Club Car
Power Drive 2 Charger Relay Electric Club Car
Power Wise 28115 G04 bad relay Electric EZGO
Relay on Timer Board Power Wise Electric EZGO
Power Relay? Electric Club Car


All times are GMT -5. The time now is 06:01 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.