lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-18-2015, 08:57 AM   #1
treeguy27
Not Yet Wild
 
Join Date: Feb 2015
Posts: 41
Default '91 3pg reed cage?

Does anyone know a source for a replacement reed cage? Mine is worn around the edges and not providing a good seal. The pedals are fine, but the cage is worn. I've looked around and not coming up with anything. Is there possibly a cage from a different application like an ATV that might work? Has anyone tried to restore a worn cage with epoxy or something similar?
treeguy27 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-18-2015, 02:30 PM   #2
TheGDFP
Gone Wild
E-Z-GO
 
Join Date: Apr 2014
Location: Flint, MI, USA
Posts: 656
Default Re: '91 3pg reed cage?

There are no reasonable exact replacements, but plenty that can be made to work.
Yamaha used reeds on millions of bikes, so eBay is lousy with them.

But, it can be run without the rubber coating. I use a whetstone to smooth and flatten the cage.

TheGDFP is offline   Reply With Quote
Old 06-18-2015, 05:10 PM   #3
treeguy27
Not Yet Wild
 
Join Date: Feb 2015
Posts: 41
Default Re: '91 3pg reed cage?

Thank you for the info. My cart is currently at the lake so I can't take any measurements from the existing cage. Do you happen to know which of these most closely matches the stock one I have? I don't mind doing a little modification to make one work, but don't have any clue where to start. Will the shape and style of the cage and pedals make a major difference in performance, or will any cage that can be made to fit in there be adequate? If you or anyone knows which one would be a good starting point I would greatly appreciate it.
treeguy27 is offline   Reply With Quote
Old 06-18-2015, 07:09 PM   #4
TheGDFP
Gone Wild
E-Z-GO
 
Join Date: Apr 2014
Location: Flint, MI, USA
Posts: 656
Default Re: '91 3pg reed cage?

I used a G1 cage on the 3pg I recently did. It's a little bigger and required opening the holes up. Same gasket pattern was used on a lot of bikes, and smaller cages.
http://www.boats.net/parts/detail/ya...621-00-00.html
TheGDFP is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
91 marathon reed cage Gas EZGO
G1 reed block (cage). Any bikes have same? Gas Yamaha
Wanted!! 1989 EZGO reed block-cage Golf Carts and Parts
reed cage and reeds for 88 2 cycle Gas EZGO
g1 intake reed cage Gas Yamaha


All times are GMT -5. The time now is 06:32 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.