|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-04-2016, 10:29 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 67
|
96 ezgo wiring issues
I have a 96 txt electric and someone before me unhooked every wire. I have looked all over at diagrams and none of them are the same for what I have or make sense. What color wires to what location would be much more simple. Cannot figure it out please help
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-04-2016, 10:39 PM
|
#2 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 67
|
Re: 96 ezgo wiring issues
Should be more specific. The wires on the Selnoid and the key switch
|
|
|
|
|
03-05-2016, 05:13 AM
|
#3 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,181
|
Re: 96 ezgo wiring issues
First we need to know what drive system it has. 96 will be a series or DCS. FnR switch will be by your right leg. Does it have an arm going to another box or is it a round puck with microswitchs? First is series, second is DCS.
|
|
|
|
03-05-2016, 06:48 AM
|
#4 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 67
|
Re: 96 ezgo wiring issues
It has a round puck with micro switches
|
|
|
|
|
03-05-2016, 07:45 AM
|
#5 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,181
|
Re: 96 ezgo wiring issues
That would be a DCS. That diagram can be found here http://www.buggiesgonewild.com/elect...g-manuals.html
|
|
|
|
|
03-05-2016, 03:46 PM
|
#6 | |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 96 ezgo wiring issues
Quote:
One of the large terminals has a heavy cable coning from the main positive terminal of the battery pack, plus to small red wires. The other large terminal has two heavy cables on it. One going to the B+ terminal on the controller and the other going to the A2 stud on the motor. (Or it might only have the cable going to B+ on the controller and the cable to A2 on motor is connected on the B+ terminal on the controller - either way works) One small terminal has 3 wires on it, Wht/Yel, Red and Yellow. ----------- Also attached are a Schematic for your cart and a service manual. The other small terminal has a single Blue wire on it. --------- There are two versions of the key switch. One for cart with lights and one for cart without lights. Attached is a drawing for a series drive cart with lights and battery meter. It is the same for a DCS cart expect for the color of two wires coming in from the bottom. In a DCS cart the wire labeled GRN is Yellow and the wire labeled BLU is White/Yellow. --------- Also attached are a schematic and service manual for your cart. |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 93 G9a wiring issues | Gas Yamaha | |||
| Wiring issues | Gas Club Car | |||
| ezgo txt gas wiring issues | Gas EZGO | |||
| 84 36v cc wiring issues | Electric Club Car | |||
| 92 wiring issues | Electric EZGO | |||
Linear Mode
