|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-21-2016, 10:18 PM | #1 |
Not Yet Wild
Join Date: Dec 2016
Posts: 3
|
Replaced batteries and now the motor isn't responding?
I'm completely new here so bear with me. I've searched and couldn't find a similar problem to what I'm encountering here.
I just got a 2009 TXT from a client. The batteries that were in it were not holding a charge and the cart had sat unused for almost a year in his garage. I bought a new set of batteries, removed the old and replaced them, making sure to rewire it exactly the same way and put the charger to it. Charger seems to be working fine and now says the batteries are charged. Before, the cart responded and ran for a very short time. Now the headlights and tail lights come on but the motor doesn't respond. The backup beeper doesn't sound in reverse and the roll away alert doesn't sound when I push it. It's almost like it's stuck in the Tow/Maintenance position. The only thing I did was put it in tow position to change the batteries then clicked it back. Did I miss something here? Thanks in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-21-2016, 11:07 PM | #2 |
Not Yet Wild
Join Date: Dec 2016
Posts: 3
|
Re: Replaced batteries and now the motor isn't responding?
I guess I answered my own question. I took my multimeter to the Tow/Maintenance switch and it has a bad connection. I jumped it and all worked perfectly. I'll pick up a new one tomorrow.
|
12-22-2016, 10:30 AM | #3 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Did you switch to tow/maintenance before changing the batteries? Does the solenoid click when you try to go? Reed switch? Sometimes when people bypass the reed switch they take it directly to the battery pack positive, and I've seen a lot of time when people change batteries that little wire will fall down and get over looked. It is where the activation circuit gets power from to operate the solenoid and power up the control.
Sent from my SM-G930R4 using Tapatalk |
12-22-2016, 06:27 PM | #4 |
Not Yet Wild
Join Date: Dec 2016
Posts: 3
|
Re: Replaced batteries and now the motor isn't responding?
It was the Tow/maintenance switch not making a solid connection. I replaced it today and all is right with the universe.
|
12-22-2016, 06:29 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Replaced batteries and now the motor isn't responding?
Good to hear it, thank you
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Replaced batteries and now it won't go | Electric EZGO | |||
Replaced everything except batteries and have no go | Electric EZGO | |||
Replaced batteries, now no reverse | Electric Club Car | |||
Yamaha 48v charger not responding to new batteries | Electric Yamaha | |||
Batteries need replaced? | Electric EZGO |