Altrax XCT Controller

[RicksRam]

Ok guys after talking to several people on here including scotty and johnnie who have been a great help to me over the last few years I think im going to go with the XCT 500 in the next few months. My question is will this controller fit on my controller mounting plate or is it to big and is the plug for the pins the same as the DCX controller I have now. Thanks again

[scottyb]

http://www.buggiesgonewild.com/elect...s-upgrade.html

[JohnnieB]

Originally Posted by RicksRam

Ok guys after talking to several people on here including scotty and johnnie who have been a great help to me over the last few years I think im going to go with the XCT 500 in the next few months.

1. My question is will this controller fit on my controller mounting plate or is it to big

2. and is the plug for the pins the same as the DCX controller I have now. Thanks again

1. The mounting holes on the ones being sold now match up with holes in the stock heatsink. Earlier ones needed a mounting adapter. Either way, it fits mounts on the stock heatsink.

2. You order the XCT for the original drive system your cart had, DCS, PDS, or TXT-48, or the other make/model carts with sepex drives.

If you had a DCS, it will be plug-n-play, if it was a PDS it is still plug-n-play, but you'll need to connect the speed sensor, which wasn't used with the DCX controller.

[RicksRam]

Thank you and Merry Christmas