|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-05-2018, 05:35 PM | #11 |
Gone Wild
Join Date: May 2016
Posts: 225
|
Re: symptoms of crossed cables at motor?
finally got around to switching A1 and A2,like Sergio and others mentioned just caused motor to change directions.No speed changes.i need to diagnose these "beep" codes 3 long 7 short and 4 long 10 short.the book has some VERY poor verbage on controller fault code solutions..?
i heard some peeps convert these controllers Kinetek KCCA0004 to Curtis 1266 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-08-2018, 11:44 AM | #12 |
Gone Wild
Join Date: Apr 2015
Location: Pennsylvania
Posts: 378
|
Re: symptoms of crossed cables at motor?
FSIP does have a conversion to a 1266 available for Fairplay kinitek, yes. It involves some digging around in the throttle wiring and I've heard of some issues with 2010 and on models because of some wiring changes by Fairplay. Basically you just have to remove the I/Os (FWD/REV, pedal, etc) from B- and set them up for B+ and add a wire to each the throttle low and the BDI low. It's all in the instructions.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
4g battery cables with 2g motor cables | Electric EZGO | |||
Symptoms of failing or failed motor brushes | Electric Club Car | |||
1/0 Battery Cables to 6 AWG Motor Cables | Electric EZGO | |||
crossed wired | Electric EZGO |