|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-04-2018, 06:08 PM | #1 |
Not Yet Wild
Join Date: Mar 2018
Location: Kansas
Posts: 10
|
07 precedent alltrax working question
07 club car precedent alltrax 400 wiring question, alltrax diagram doesn’t show this extra red wire that was on my solenoid and runs back into the wiring loom, so I leave it that way??
Also have similar black wire that runs from b- back into loom also, is that correct?? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2018, 06:43 PM | #2 |
Not Yet Wild
Join Date: Mar 2018
Location: Kansas
Posts: 10
|
Re: 07 precedent alltrax working question
Pic attached
|
04-04-2018, 06:51 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: 07 precedent alltrax working question
You need both connected back.
The red wire is the connection to power the Tow/Run switch, in the diagram they show the pink wire going straight to the solenoid. The black wire is the negative for the accessories. |
04-04-2018, 07:36 PM | #4 |
Not Yet Wild
Join Date: Mar 2018
Location: Kansas
Posts: 10
|
Re: 07 precedent alltrax working question
Thanks, would have had it done tonight but my spade connectors were wrong size to go on solenoid.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
CC Precedent - Alltrax / Plum Quick upgrade - Not working | Electric Club Car | |||
Alltrax SPM no error codes but not working | Extreme DC! | |||
New Alltrax and Solenoid install: nothing working | Electric Club Car | |||
Alltrax DCX/Precedent wiring question | Electric Club Car | |||
Can't get new Alltrax DCX500 and motor working....HELP!!!! | Electric EZGO |