|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-11-2018, 07:19 PM | #21 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
Yes, with your Alltrax Tool Kit.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-11-2018, 07:43 PM | #22 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
Did You get your Alltrax programmed with the A4 field Map?
The correct field map is really important and I think there is a "high speed" and a "torque mode" biased field map. If You don't have it just email Alltrax and they will send you the field maps and instructions to install. You should also have your motor pole set to 4 poles. You can post screen shots of your setup screens if you need help. |
07-11-2018, 07:58 PM | #23 |
Getting Wild
Join Date: Jun 2018
Posts: 103
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
It got it with the Torque Map...bought all as a package from David at Revolution. I confirmed with him on torque map. Will need to get a pc :)
|
07-11-2018, 08:09 PM | #24 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
David is a good guy so it should be all setup, but Yes, it is at the bottom of the "Controller Settings" tab.
That is where the Regen Brake settings are as well. Adjust Both "Max Regen Battery Amps" and "Max Regen Armature Amps" to the same value first. Increase the "Max Regen Battery Amps" if You want more high speed brake force. Increase the "Max Regen Armature Amps" if You want more lower speed brake force. |
07-11-2018, 08:15 PM | #25 | |
Getting Wild
Join Date: Jun 2018
Posts: 103
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
Quote:
I'm on a Mac so will have to get my dad over here with his PC to run the software :) |
|
07-11-2018, 08:40 PM | #26 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
We have members here that use a Mac to run the Alltrax software in a virtual environment, I am not sure what they are using for the Windows layer, perhaps someone will comment.
If You mean the throttle response seems excessively sensitive near the top, You can adjust all of those parameters with the software. |
07-11-2018, 08:59 PM | #27 |
Getting Wild
Join Date: Jun 2018
Posts: 103
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
Just went out for another drive to break in the motor and noticed if I'm very careful about not moving my foot at all, it stays consistent. But we have concrete roads and notice when I hit the dividers in the concrete and it ever so slightly shifts my foot or bumps up a tad, the brakes will kick in a bit.
|
07-12-2018, 11:49 PM | #28 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Cart Slowly Shutters After Controller/Motor/Cable/Solenoid Upgrade
Reduce the throttle rate to slow the controller response to minute inputs like pavement bumps.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
STAR controller 600 amp upgrade & solenoid | Star and Fairplay | |||
ezgo rxv fleet solenoid click. motor run slowly. why? | Electric EZGO | |||
Motor upgrade options for '88 solenoid cart. | Electric Club Car | |||
1996 dcs motor cable upgrade | Electric EZGO | |||
Controller & Solenoid upgrade | Electric EZGO |