|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-09-2020, 03:35 PM | #1 |
Not Yet Wild
Join Date: Mar 2020
Posts: 5
|
36v txt direction selector mount rusted out
2003 36 volt TXT and my forward/reverse knob suddenly started binding and the cart stopped working. I found the direction selector assembly (in front of the controller/solenoid) flopping around. I was able to get the cam moved into the correct spot for going forward. I found the mounting plate completely rusted out. I am convinced the correct way to fix this is to either mount a plate and bolt the assembly to it or possibly find the part # for the plate it mounts to. I have found what appears to be the part but it is called a "splash panel" in my parts manual. It is item #24 p/n 70244-G02 on page C-5 in my manual p/n 28789-G01. Is this the plate that the direction selector assembly actually mounts to? Any help will be greatly appreciated.
Regards, SurfsideRick Last edited by SurfsideRick; 03-09-2020 at 03:37 PM.. Reason: omitted page number |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-09-2020, 04:47 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 36v txt direction selector mount rusted out
Picture of the part you are looking for?
|
03-09-2020, 05:03 PM | #3 |
Not Yet Wild
Join Date: Mar 2020
Posts: 5
|
Re: 36v txt direction selector mount rusted out
In the attached pic it's #24. On the far side of the cart though. Thanks for looking.
|
03-09-2020, 05:33 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 36v txt direction selector mount rusted out
I see, we don't see that very often. aka never out here. lol
Maybe find one used or just weld a fresh piece over the old...? I'm curious. Did you find a price on that piece? |
03-09-2020, 05:53 PM | #5 |
Not Yet Wild
Join Date: Mar 2020
Posts: 5
|
Re: 36v txt direction selector mount rusted out
$13.37 here
countrycat.com e-z-go-part-70244g05-splash-pan-painted I found others for $43 up. I'm going to get one just to see if I can get something to mount my direction selector on. Thanks again. |
03-10-2020, 05:35 AM | #6 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,995
|
Re: 36v txt direction selector mount rusted out
Rick, the part you mentioned in your OP is in fact what you need, its just bolted in so I would recommend to buy a new one....OR if you can find one used, that would do just as well.
|
Tags |
direction selector, parts |
|
|
Similar Threads | ||||
Thread | Forum | |||
What is this connector for below FWD/REV selector? | Electric Club Car | |||
2003 Electric EZGO direction selector plate broken | Electric EZGO | |||
Wiring question with RXV Direction Selector switch | Electric EZGO | |||
direction selector handle & bracket needed | Bike & ATV Engine Swaps | |||
Selector | Electric EZGO |