|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-14-2020, 09:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2019
Posts: 4
|
89 Marathon front shock/lift kit issues
Hope someone can help me out here. I searched all over and couldn't find anything that would help. I bought the 4" block lift kit and Golf Cart King shocks for my 89 Marathon. After I put the lift kit on and new shocks it appears the new shocks are way to long. as you can see from the pictures The shocks can connect to the front axle without the C mount. On the other side if I use the C mount the Shock is to long even when fully compressed.
    Not sure if the longer shocks are fine and I just need to grid the edge of the lift block so it doesn't rub on the shock. If someone can tell me what I'm doing wrong I would be super grateful. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-14-2020, 09:37 PM
|
#2 |
|
Not Yet Wild
Join Date: Oct 2019
Posts: 4
|
Re: 89 Marathon front shock/lift kit issues
OMG I just noticed I mounted the leaf springs on the wrong side of the frame!
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1986 Marathon Front Shock cover | Gas EZGO | |||
| Location on front lift on 93 Marathon | Gas EZGO | |||
| 94 marathon lift issues and questions help (again after server crashed....) | Lifted Golf Carts | |||
| WTB: Front Shock Cover Marathon | Golf Carts and Parts | |||
| questions about my new lift, top shock mounts and front engine placment. | Gas Club Car | |||
Linear Mode
