Starter motor no go when gas pedal depressed

[Wagner7911]

My 2007 precedent was working fine then started hesitating before running. Yesterday it quit. Nothing happens when gas pedal is depressed. The starter motor will run if you jump out the starter solenoid. Replaced battery and solenoid still nothing. Could this be the micro switch on the gas pedal? Any help would be appreciated.

[shadowman]

one of the microswitches in black box activates solenoid.........that may be your problem................................

[etech]

Originally Posted by shadowman

one of the microswitches in black box activates solenoid.........that may be your problem................................

The Precedent model does not have a 'black box'. Only DS models have the 'black box'. There are some micro switches under the floor near the gas pedal and also around the operate/maintenance switch under the seat.

Ed

[shadowman]

Originally Posted by etech

The Precedent model does not have a 'black box'. Only DS models have the 'black box'. There are some micro switches under the floor near the gas pedal and also around the operate/maintenance switch under the seat.

Ed

ok so where ever the micrswitch is located that could be the problem unless it dosn,t have a microswitch to activate solenoid.......................

[Wagner7911]

Thanks for the help. It was one of the micros in the black box. Really wish you could change the $10 micro without breaking the box. Anyway got it fixed. The return spring on the micro fell out. Now works great and didn't cost a dime. $134 for a new box is a little crazy if you ask me.

[shadowman]

Originally Posted by Wagner7911

Thanks for the help. It was one of the micros in the black box. Really wish you could change the $10 micro without breaking the box. Anyway got it fixed. The return spring on the micro fell out. Now works great and didn't cost a dime. $134 for a new box is a little crazy if you ask me.

......................................... ...

[___Brandon]

Originally Posted by Wagner7911

Thanks for the help. It was one of the micros in the black box. Really wish you could change the $10 micro without breaking the box. Anyway got it fixed. The return spring on the micro fell out. Now works great and didn't cost a dime. $134 for a new box is a little crazy if you ask me.

By black box do you mean the box that is hooked directly to the gas pedal?