|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-23-2013, 01:23 PM | #21 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: 1984 stock DS, fixing it up.
Yeah, but it was nice being on the beach in key largo for the week with my wife. I was ordering parts while I was down there.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-23-2013, 01:31 PM | #22 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 1984 stock DS, fixing it up.
|
10-23-2013, 02:06 PM | #23 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: 1984 stock DS, fixing it up.
What do you think about that input shaft seal on the axle? think its worth replacing or is is easy to replace?
|
10-24-2013, 01:17 PM | #24 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: 1984 stock DS, fixing it up.
looking on the site here, the axle may have been filled to high causing the leak at the input shaft. will check it later. tried working on the cart last night but the garage mess won out. cant stand having to move a bunch of crap around just just work on something. goodwill will be getting a truckload this weekend.
|
10-24-2013, 10:28 PM | #25 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 1984 stock DS, fixing it up.
I really don't have much experience with the axle seal, someone else who has changed one should know...
|
10-25-2013, 07:30 AM | #26 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: 1984 stock DS, fixing it up.
Looking at this pic,
It looks like past the splined portion it's wide open to the oil. So if it were overfilled the oil would seep past the splines until the level got low enough. I think I'll just clean it up and make sure the oil is at the correct level. |
10-25-2013, 08:28 PM | #27 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: 1984 stock DS, fixing it up.
Went at the rear end tonight. Got it pulled and the springs mostly off. On the front 2 mounts the sleeve is frozen to the bolt.
Got the Terrell axle out ready for grinding and re painting. Hope to have that done this weekend. |
10-26-2013, 08:02 PM | #28 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: 1984 stock DS, fixing it up.
Got all the rear end parts cleaned up. Got some paint on the axle after sandblasting and wirewheeling. gotta grab some more paint tomorrow to do the rest of it.
|
10-26-2013, 09:22 PM | #29 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: 1984 stock DS, fixing it up.
Looking good. Did you paint the brake shoes?
|
10-27-2013, 08:34 AM | #30 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: 1984 stock DS, fixing it up.
Yes I did! The brakes are shot so it's getting new shoes and drums when it gets back on the cart.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
....maybe I should just sell instead of fixing | Electric EZGO | |||
Fixing up a 2004 Ez Go TXT | Gas EZGO | |||
1984 EZGO Stock 2-Stroke Motor | Golf Carts and Parts | |||
Fixing a rip in fender | Gas EZGO |