|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-06-2017, 02:02 PM | #1 |
Gone Wild
Join Date: Jun 2012
Location: Eagle, WI
Posts: 317
|
Drive wheel stud size
I re-torqued my axle nuts over the weekend, and the noise went away.
When I was re-installing the tires a couple of the lug nuts would strip and not get tight enough. Can someone tell me what the wheel stud thread size is? The threads look ok on the studs, so I think I have the wrong size chrome nuts. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2017, 02:16 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Drive wheel stud size
M12-1.25
|
06-06-2017, 02:21 PM | #3 |
Gone Wild
Join Date: Jun 2012
Location: Eagle, WI
Posts: 317
|
Re: Drive wheel stud size
Thanks. I have a feeling that the lug nuts I have may be 1/2". I ordered some M12-1.25 chrome nuts.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor stud size | Electric EZGO | |||
Stock axle wheel stud thread size. | Electric Yamaha | |||
What size is the stud on a battery | Electric EZGO | |||
Lugnut, stud, rear wheel problem (wheel came off) | Lifted Golf Carts | |||
G1 rear wheel stud size? | Gas Yamaha |