|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-23-2019, 03:51 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2016
Location: North Canton, OH
Posts: 40
|
Yamaha G2 Ball Joints
Have any of you found alternatives to the oem ball joint part number? Looking for a crossedover part number Yamaha is using on their ATV’s?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-24-2019, 08:17 AM
|
#2 |
|
Nincompoop village idiot
 Join Date: Apr 2018
Location: Michigan
Posts: 9,682
|
Re: Yamaha G2 Ball Joints
Am I mistaken? I don't think the G2 has ball joints, it should have king pins.
Or are you talking about the tie rods ends? |
|
|
|
|
04-24-2019, 08:22 AM
|
#3 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,865
|
Re: Yamaha G2 Ball Joints
They have king pins. May be talking about the tie rods.
|
|
|
|
|
|
|
|
04-24-2019, 04:55 PM
|
#4 |
|
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Yamaha G2 Ball Joints
Not able to find tie rods? They should be available.
|
|
|
|
|
04-24-2019, 05:04 PM
|
#5 |
|
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,639
|
Re: Yamaha G2 Ball Joints
My 95 G14 uses the G2 type tie rod ends. You can buy either just the ends themselves or the whole assembly. If just the outers are bad just buy the ends. If the inner and outer ends are bad it might be easier getting the whole assembly as the threads are left and right hand depending on side and position.I made the mistake of ordering the G14 listed units not knowing the 96 G 14 uses the G 16 type which are completely different.
|
|
|
|
|
04-24-2019, 05:55 PM
|
#6 | |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,865
|
Re: Yamaha G2 Ball Joints
Quote:
|
|
|
|
||
|
|
|
|
04-25-2019, 03:09 PM
|
#7 |
|
Not Yet Wild
Join Date: May 2016
Location: North Canton, OH
Posts: 40
|
Re: Yamaha G2 Ball Joints
Yes sorry for the confusion. Tie rod ends. I’m more curious if you know know of Yamaha using them on crossover applications. We have literally a 1000 different tie rod ends here at work and I know one has to fit. Just not sure which one.... I do know they are 12mm x 1.25 which is an odd ball size.
|
|
|
|
|
05-01-2019, 08:50 AM
|
#8 |
|
Not Yet Wild
Join Date: May 2016
Location: North Canton, OH
Posts: 40
|
Re: Yamaha G2 Ball Joints
Any luck or is everyone just using the stock replacements?
|
|
|
|
|
05-01-2019, 09:13 AM
|
#9 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,865
|
Re: Yamaha G2 Ball Joints
I've never had to replace any on my golf carts. Pull one and see if you can match it up with one at work and try it. Should work fine if the same size. If this is not an option, I'd just go stock.
|
|
|
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ball joints - Governor/carburetor/exhaust butterfly valve simple repair (Yamaha calls | Gas Yamaha | |||
| Yamaha G-1 carb to exhaust ball joints needed | Gas Yamaha | |||
| Changing ball joints to heim joints CC DS | Electric Club Car | |||
| tie rod inner ball joints.. is there a washer? | Electric EZGO | |||
| Tie rod end ball joints | Gas EZGO | |||
Linear Mode
