|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-26-2015, 11:13 PM | #1 |
Not Yet Wild
Join Date: May 2015
Posts: 53
|
99 regen 2/pd plus motor and controller upgrade
All
Going to be removing my stock motor,controller, and solenoid next week and installing my new d&d motor, Altrax xct controller, and hd solenoid!! Really excited to try out this new setup that Scottyb helped me with. Any tips and pointers would be appreciated!!!! Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-30-2015, 10:14 AM | #2 |
Not Yet Wild
Join Date: Jul 2015
Posts: 8
|
Re: 99 regen 2/pd plus motor and controller upgrade
How did this setup work for you? I'm interested because I have the same stock setup and am researching on which route to go. I need hill climbing torque. Scottyb and everybody have been really helpful, I'm just torn on which route to take.
|
08-09-2015, 08:22 PM | #3 |
Not Yet Wild
Join Date: May 2015
Posts: 53
|
Hasn't ran since I did the upgrade. Been in constant communication with Scottyb and Alltrax trying to figure out why. Have traced every wire and tested every spot there is to test. Stock motor is mounted currently and trying to locate a stock controller. On the third XCT and running low on patience. Hopefully we get it going
Sent from my SM-N900V using Tapatalk |
08-10-2015, 08:36 AM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: 99 regen 2/pd plus motor and controller upgrade
Just curious, what are the symptoms?
|
08-10-2015, 10:24 AM | #5 |
Gone Wild
Join Date: Sep 2012
Location: Chestermere, Alberta - Canada
Posts: 1,146
|
Re: 99 regen 2/pd plus motor and controller upgrade
I'm wondering too. This was one conversion I would have considered for my Regen-1 (with a IQ replacement harness of course) - but if the XCT controller can't perform with older Regen carts as advertised - it would sure be good to know that!
|
08-10-2015, 07:02 PM | #6 |
Not Yet Wild
Join Date: May 2015
Posts: 53
|
Had an issue with the 1st xct which ended up being a 12v relay that was shorted out. They sent replacement for that. Now I have an issue where the cart goes but it jumps when accelerating. I do want to say that Scottyb and Alltrax have been awesome. They have been doing everything to try and help me get this issue resolved.
Sent from my SM-N900V using Tapatalk |
08-11-2015, 04:58 PM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Chestermere, Alberta - Canada
Posts: 1,146
|
Re: 99 regen 2/pd plus motor and controller upgrade
So, reading between the lines, I'm going to guess that the new controller is "struggling-to-deal-with" the non-linear nature of a multi-step potentiometer. Just a flat-a** guess on my part, though.
In any case - its great (and not surprising) that your getting full-on support from Scotty & Co. Early adopters do sometimes experience a shake-down period (no pun intended) - and your among the first with that particular product. I suspect a number of us old cart owners are interested in the cause/solution that develops. |
08-11-2015, 06:06 PM | #8 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: 99 regen 2/pd plus motor and controller upgrade
does your cart have a MCOR?
|
08-11-2015, 06:16 PM | #9 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 99 regen 2/pd plus motor and controller upgrade
Quote:
The Alltrax control reads any MCOR signal and establishes it as 0-100%. And if your signal changes as MCORS can do over time, you can ask the control to re-calibrate to accommodate the MCOR unit. Nobody is going to be able to tell you what the problem is with this cart at this time. Software engineers are pouring over the data collected from 2 different models which exhibited similar characteristics. It's a glitch. They will solve it. I'm not sure I was supposed to post as much but, I can't sit silent while armchair technicians sling guesses & accusations. Thank you Brandon for your patience in all this. |
|
08-11-2015, 06:20 PM | #10 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 99 regen 2/pd plus motor and controller upgrade
Quote:
The Alltrax control reads any MCOR signal and establishes it as 0-100%. And if your signal changes as MCORS can do over time, you can ask the control to re-calibrate to accommodate the MCOR unit. Nobody is going to be able to tell you what the problem is with this cart at this time. Software engineers are pouring over the data collected from 2 different models which exhibited similar characteristics. It's a glitch. They will solve it. Thank you Brandon for your patience. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
99 Regen 2 motor/controller upgrade | Electric Club Car | |||
need help with motor and controller upgrade | Electric EZGO | |||
2001 Club Car "Regen" GE Controller Upgrade | Electric Club Car | |||
club car regen speed controller upgrade | Electric Club Car | |||
2001 CC Regen Motor Upgrade Suggestions | Electric Club Car |