|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-30-2015, 06:47 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 56
|
1996 to 2002 ez go 36v conversion ...stuck!
Had a 1996 36v Ezgo Curtis 10 pin controller with lever handle and 2 small micro switches. controller tested bad. Installed a Curtis 6 pin /4 wire controller from a 2002 ezgo txt with no tow switch ,and got the forward/reverse handle from same cart ,my new controller has no A1 or f1 or f2 pins ,looking for diagrams,or schematics for controller and forward reverse lever .Also will I need to change out the gas pedal ? I know I have to change out the small wires to motor with large ones,but have been looking for days on the internet !! Thanks in advance! Ill post pics
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-30-2015, 06:49 AM
|
#2 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 56
|
Re: 1996 to 2002 ez go 36v conversion ...stuck!
This is the 10 pin controller that went bad
|
|
|
|
|
06-30-2015, 07:39 AM
|
#3 |
|
Master of All Things
 Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,976
|
Re: 1996 to 2002 ez go 36v conversion ...stuck!
RoscoeJ....I have more bad news for you.....if you didn't realize it......your current motor (sepex drive) will not work with that controller/F&R set-up.....you need a SERIES Drive motor.
|
|
|
|
|
06-30-2015, 10:39 AM
|
#4 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 56
|
Re: 1996 to 2002 ez go 36v conversion ...stuck!
Will I have to change gas pedal too...Oh the Fun never stops... Lol thanks for the Info ! Any way to wire it to make it work ?
|
|
|
|
|
06-30-2015, 10:51 AM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1996 to 2002 ez go 36v conversion ...stuck!
The key switch and gas pedal can stay - these parts are common to both systems. You could get a series wire harness. That may make it easier but, not the only way to accomplish the conversion.
Here is the diagram for the system you have and the system you are converting to - Print them both out. Get a six pack and pull a chair up to the cart.  |
|
|
|
|
07-01-2015, 08:13 AM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 56
|
Re: 1996 to 2002 ez go 36v conversion ...stuck!
My new 6 pin 4 wire Curtis 36v controller has no A1...and my old controller had 10 pin on top.... What is A1 used for? Thanks for the pics!
|
|
|
|
|
07-01-2015, 08:19 AM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 56
|
Re: 1996 to 2002 ez go 36v conversion ...stuck!
My new 6 pin 4 wire Curtis 36v controller has no A1...and my old controller had 10 pin on top.... I have a used forward /reverse switch that the cables were removed from ..I know the old cables were labeled ,on the for/rev switch,but I don't have cables . And I can read schematics but dont know correct way to view
If you could find a pic of ezgo with lever handle with bar could help a lot to install forward rev switch were getting eatin alive by Mosquitos here! |
|
|
|
|
07-01-2015, 09:01 AM
|
#8 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 56
|
Re: 1996 to 2002 ez go 36v conversion ...stuck!
I don't have the controller with the pins in the front ,don't know how diff they are.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2002 or 1996 better for lifting? | Electric EZGO | |||
| Ezgo Charger conversion Post 1996 to Pre 1996 | Electric EZGO | |||
| 1996 Ds Series, PB-6 throttle conversion | Electric Club Car | |||
| 2002 model AA club car stuck throttle... | Electric Club Car | |||
| 1996 ezgo txt electric stuck wont move?? | Electric EZGO | |||
Linear Mode
