|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-24-2017, 02:42 PM | #1 |
Gone Wild
Join Date: May 2016
Posts: 373
|
Motor "spline" bushing question
Just removed stock motor from the cart and there's no rubber bushing in the shaft. Is this normal for a 2002 DS? Researching "motor change" everyone always mentions a rubber bushing. Should I get one before installing new motor? Or do I need one?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-24-2017, 03:38 PM | #2 |
Guest
Posts: n/a
|
Re: Motor "spline" bushing question
no the rubber is usally left off ... make sure the centering bushing is good
|
04-24-2017, 03:48 PM | #3 |
Gone Wild
Join Date: May 2016
Posts: 373
|
Re: Motor "spline" bushing question
There was nothing in the stock shaft is what im saying
|
04-24-2017, 04:21 PM | #4 |
Guest
Posts: n/a
|
Re: Motor "spline" bushing question
sorry .... it is a centering kit some have them some don't (2002)
good read >>> http://www.buggiesgonewild.com/elect...ering-kit.html http://www.revolutiongolfcars.com/_p...-kit---am10039 |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO terrain 500 blown motor "kawasaki 401cc" | Gas EZGO | |||
Motor spline bushing/spacer? | Electric EZGO | |||
tapered clutch bushing install on a 1" Vanguard twin? | Big Block Talk! | |||
Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO |