What happened?

gornoman · 10-30-2011, 09:39 PM

Quote:

Originally Posted by AzPete

Is it possible to seal the ITS?

A steel rod and some wires go throught the sides of the ITS chamber. The steel rod is moving. If you can seal that part, the rest would be easy.

Silverstreak · 10-31-2011, 09:33 AM

Okay....showing my ignorance here......what's an ITS?

scottyb · 10-31-2011, 09:38 AM

Inductive Throttle System

Under the floor.

It sends the peddle position signal to the controller.

Remove the rocker and lift the mat on the driver side to access.

But testing can be done near the controller if you follow the wires back.

Silverstreak · 10-31-2011, 11:28 AM

Thanks,
But what's a rocker? lol.
I've noticed that there's alot of play in the connection of the rod that's attached to the pedal and the rod that must go back to the controller. Is that okay?

scottyb · 10-31-2011, 11:48 AM

Rocker is short for rocker panel, you need some 'slack' in the peddle to give the peddle micro-switch time to react before the plunger enters the induction tunnel.

Silverstreak · 10-31-2011, 11:54 AM

Thanks scotty.

10-31-2011, 09:33 AM	#12
Silverstreak Gone Wild Join Date: Sep 2011 Location: Midwest Posts: 385	Re: What happened? Okay....showing my ignorance here......what's an ITS?

10-31-2011, 09:38 AM	#13
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: What happened? Inductive Throttle System Under the floor. It sends the peddle position signal to the controller. Remove the rocker and lift the mat on the driver side to access. But testing can be done near the controller if you follow the wires back.

10-31-2011, 11:28 AM	#14
Silverstreak Gone Wild Join Date: Sep 2011 Location: Midwest Posts: 385	Re: What happened? Thanks, But what's a rocker? lol. I've noticed that there's alot of play in the connection of the rod that's attached to the pedal and the rod that must go back to the controller. Is that okay?

10-31-2011, 11:48 AM	#15
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: What happened? Rocker is short for rocker panel, you need some 'slack' in the peddle to give the peddle micro-switch time to react before the plunger enters the induction tunnel.

10-31-2011, 11:54 AM	#16
Silverstreak Gone Wild Join Date: Sep 2011 Location: Midwest Posts: 385	Re: What happened? Thanks scotty.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
What Just Happened?!?	Gas EZGO
Wtf just happened?	Electric Club Car