|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-15-2012, 08:26 AM | #1 |
Getting Wild
Join Date: Jun 2012
Posts: 136
|
first power to new controller
Is there anything special that needs to be done or expected the first time i send power to a new controller, solenoid, and motor?
Controller is supposidly programmed from the factory. I put all new 2 gauge wires and replaced them one by one so everything should be right. Anything i should check for with the connections other than just making sure nothing is touching anything it shouldnt? Motor should be in monday. Cant wait to get this thing going. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-15-2012, 08:35 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: first power to new controller
no, connect the battery pack main + last and test both directions. I like to do it with the rear wheels jacked up in the air.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
alltrax controller power question | Electric Yamaha | |||
97 CC low power, motor controller? | Electric Club Car | |||
Solenoid does not clickand no power to controller | Electric EZGO | |||
loss of power with new controller | Electric EZGO | |||
no power to controller side of solenoid | Electric Club Car |