Stereo Installation 2010 EZGO PDS

[garrettgrant]

Great thread and great pictures!!!

However, I am a little confused about adding the switch to turn the converter on and off. There are a lot of videos and threads about installing converters. This is the first I have heard about installing a switch. Is anyone else doing this?

Also, where there any problems getting access to run the wires from the back of the radio unit, down to under the cart?

Thanks

[Pats Fan Willy]

Originally Posted by garrettgrant

Great thread and great pictures!!!

However, I am a little confused about adding the switch to turn the converter on and off. There are a lot of videos and threads about installing converters. This is the first I have heard about installing a switch. Is anyone else doing this?

Also, where there any problems getting access to run the wires from the back of the radio unit, down to under the cart?

Thanks

I too was concerned about leaving my 48V converter on all the time, so i hooked up a 48V relay that shuts off the converter when i turn the key switch off.

[garrettgrant]

Can you provide some specifics on how you wired the relay switch?

Thanks

[Pats Fan Willy]

Originally Posted by garrettgrant

Can you provide some specifics on how you wired the relay switch?

Thanks

Cant remember where i found this image but this is how i wired up the relay


The connection that says from Ignition Switch i actually pulled my 48v from the solenoid. Hope this helps.