|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-04-2009, 03:03 AM | #1 |
Not Yet Wild
Join Date: Feb 2009
Location: Monroe, WA
Posts: 12
|
G22 front end
I just bought a g22 from a golf course and am in the process of fixing it up. I notice that the front camber is out quite a bit. Is this normal? If not how do I fix this. I can only see the steering rod adj for toe in and out. Thanks for any help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-04-2009, 08:07 AM | #2 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,855
|
Re: G22 front end
Usually the camber is somewhat off on most carts. If it is way off, it is usually due to bad shocks. Also check the king pins: jack the front end up, put one hand on top of a tire and one on the bottom, and see if you can move the wheel/tire back and forth.
|
|
|
03-04-2009, 01:09 PM | #3 |
Not Yet Wild
Join Date: Feb 2009
Location: Monroe, WA
Posts: 12
|
Re: G22 front end
Thanks, I will give that a try. If the king pins are bad are they expensive to fix?
|
03-05-2009, 12:08 PM | #4 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: G22 front end
Hello chelanman and Welcome to the forum.
|
03-05-2009, 12:09 PM | #5 |
doin it in the desert
Join Date: Dec 2008
Location: Sonora Desert,Az
Posts: 5,603
|
Re: G22 front end
welcome to BGW.
|
03-05-2009, 06:17 PM | #6 |
Not Yet Wild
Join Date: Feb 2009
Location: Monroe, WA
Posts: 12
|
Re: G22 front end
Thanks, as soon as I get this thing back together I will post some pics. the body was pretty beat up from being a rental, so it is heading to the paint shop for a makeover.
|
03-05-2009, 06:20 PM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G22 front end
Welcome. On G22's I always check for bent "arm knuckles" (they kind of look like an "s" and mount to the spindle and the tie rod end attatches to them) first. I have never had to change king pin related parts on a G22 yet. I don't beleive he is a site sponsor (I could be wrong), but "Plowmans" says he can "shim" your "struts/shocks" to get back camber. Good luck with your car. Later Dave
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Just finished A-Arm front end for Ez-go | Lifted Golf Carts | |||
E-z-go Front End For Sale! | Golf Carts and Parts | |||
G-16 Front End Problems? | Gas Yamaha | |||
ATV front end? | Lifted Golf Carts | |||
Front end alignment help!! | Gas EZGO |