05-18-2022, 09:19 PM | #1 |
Not Yet Wild
Join Date: Sep 2021
Location: Florida
Posts: 19
|
Programming Neos Question
I know this has been beat to death but I have reviewed all posts and also googled as well as researched on other areas.
I have a 2021 i40L. I have my windows 10 laptop with a canusb adapter and the serial cable to molex connector. I have installed all the drivers for everything and basically this is what happens. Turn on cart. Plug in everything up until the usb to PC. I plug the usb to PC and the red and green light flicker and then turn off. When I launch NEOs the red light turns on and I get the tune option. When I select it loads the page with settings but says can reception timeout. I’m sure I am missing something. I have it set to VCP in device manager so the com port is 3. Is there an adjustment I’m missing. The molex is seating fine on cart like I said hey is on. Ty! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-20-2022, 10:42 PM | #2 |
Not Yet Wild
Join Date: Sep 2021
Location: Florida
Posts: 19
|
Re: Programming Neos Question
anyone who’s programmed. Can you send a screenshot of the driver that works in device manager as well as answer, when does light turn on green. When you plug reader in and cars on and program closed or only when you turn program on.
My setup when I plug usb in it block green and red 3 times then off. When I open program it turns on solid red. Ty |
05-21-2022, 11:46 AM | #3 |
Getting Wild
Join Date: Jul 2021
Posts: 83
|
Re: Programming Neos Question
If it starts loading data down from the cart, your connection is fine. Also, if it let you choose the tune section, the connection is fine. I have seen that on a few carts where it times out loading info. Keep trying by pressing the download button. You may have to try many times, but it will eventually get it all...
Actually, the button may not say download - it might say something like "read cart" |
05-21-2022, 06:41 PM | #4 | |
Not Yet Wild
Join Date: Sep 2021
Location: Florida
Posts: 19
|
Re: Programming Neos Question
Quote:
|
|
05-23-2022, 06:45 PM | #5 |
Not Yet Wild
Join Date: Sep 2021
Location: Florida
Posts: 19
|
Re: Programming Neos Question
Just an update the cable I bought was defective. I made one and worked.
|
05-23-2022, 07:07 PM | #6 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Programming Neos Question
For the record, the cable he purchased was not from me.
|
05-23-2022, 08:46 PM | #7 |
Not Yet Wild
Join Date: Sep 2021
Location: Florida
Posts: 19
|
Re: Programming Neos Question
|
11-30-2023, 10:01 AM | #8 |
Not Yet Wild
Join Date: Feb 2017
Posts: 5
|
Re: Programming Neos Question
What the the pinouts from looking into the back of the molex connector to the Serial adapter that plugs into the CANUSB?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
NEOS/ICON Programming Software Troubleshooting | Icon | |||
Any value to my Neos Controller | Electric Yamaha | |||
NEOS Software | Icon | |||
Programming question | Icon | |||
Alltrax programming question | Electric Club Car |