|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-11-2007, 01:55 AM | #1 |
Not Yet Wild
Join Date: Dec 2007
Location: Georgia
Posts: 2
|
Changing Perf Option on an 03 PDS
Hey guys, new guy here with a question.
I have an 03 EZ-GO with a PDS controller. It is currently totally stock and set up from the factory with Performance Option 2 (Steep Hill). I just want to change it to the Perf Option 4 (Freedom), to dial back the compression braking and get the speed up from 13 MPH to 18 MPH or so. My question is: can I just rewire the J-2 (option) plug from the Option 2 configuration to the Option 4 configuration, or do I have to buy the Red Option 4 plug and swap it out? Thanks for sharing your know-how, you guys have a wealth of information. Clueless |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-11-2007, 05:20 AM | #2 |
Gone Wild
Join Date: Dec 2007
Location: Central Florida
Posts: 320
|
Re: Changing Perf Option on an 03 PDS
I know that you can do it - but if it were me - I would spend the $10 and buy the plug.
|
12-11-2007, 07:51 AM | #3 |
Just me. .
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
Re: Changing Perf Option on an 03 PDS
|
12-11-2007, 07:52 AM | #4 |
Not Yet Wild
Join Date: Dec 2007
Location: Georgia
Posts: 2
|
Re: Changing Perf Option on an 03 PDS
Thanks, Blue Chip. That was my next question (price). If that's all they cost, I'll buy one.
Not as clueless as I was before. |
12-11-2007, 08:16 AM | #5 |
Gone Wild
Join Date: Dec 2007
Location: Central Florida
Posts: 320
|
Re: Changing Perf Option on an 03 PDS
Taking the cover off of the controller is the hardest part of the deal. Make sure you have a 4" socket extension.
The whole deal should take you all of 4 minutes. If you stop to drink a beer in the process. |
12-11-2007, 08:20 AM | #6 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Re: Changing Perf Option on an 03 PDS
LOL!!!! Those two screws on the bottom are a pain to get too.
|
12-11-2007, 09:56 AM | #7 |
Gone Wild
Join Date: Dec 2007
Posts: 391
|
Re: Changing Perf Option on an 03 PDS
|
12-11-2007, 05:10 PM | #8 |
Just me. .
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
Re: Changing Perf Option on an 03 PDS
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Changing the drive belt question | Gas Columbia ParCar | |||
Changing Rear Springs To Lift Cart | Gas EZGO | |||
Changing Rearend Oil in ezgo golf cart? | Gas EZGO | |||
Changing rear driver side axle. | Gas EZGO | |||
Changing differential lube in a DANA rearend | Ezgo Gas Tech |