|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-02-2008, 10:28 AM | #1 |
Not Yet Wild
Join Date: May 2008
Posts: 3
|
EZ-Go Steering Colum removal
Hello,
I am working on a friends 96 EZ-Go Electric Golf Cart. The cart is lifted, and recently we (I) broke the aluminum steering arm. The front wheels were bound up coming off the trailer and I tried to man-handle it. I also think the front end is "bent back" putting stress on the arm. I may need to straighten it and add a "bar" to prevent it. I am pretty sure I will be replacing the arm (it now in 2 pieces right about where the bolt is in near the pivot end). I took the 3 bolts off from the lower mount of the column....is there something else to remove to get the steering column off? Is there a nut under the steering wheel cover? Is the shaft inside the column connected to the box? I want to remove the steering box, inspect the internals and order any parts now while I am at it. I hope it's just the box and not a complete unit. Thanks DG |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Tie Rod Removal | Lifted Golf Carts | |||
convert a tiller type steering to regular steering column | Gas Harley Davidson | |||
Clutch Removal | Big Block Talk! | |||
G1 Cylinder removal | Gas Yamaha |