|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-06-2017, 07:06 PM | #1 |
Gone Wild
Join Date: Jul 2015
Posts: 151
|
G29 gas pedal stop switch
Replaced my stop switch on my gas pedal. Noticed that when I put the new one on that it seemed to almost be striking on the edge of the pedal, not a lot of room left for the pedal to be striking. I couldn’t remember if my old one looked the same.
Anyone familiar with replacing the stop switch. Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-07-2017, 11:15 AM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,119
|
Re: G29 gas pedal stop switch
Did you try loosening the mounting screws and pushing the switch toward the pedal? It's probably ok the way it is but you may be able to move it enough to get better contact.
|
11-07-2017, 12:02 PM | #3 | |
Gone Wild
Join Date: Jul 2015
Posts: 151
|
Re: G29 gas pedal stop switch
Quote:
Thanks for the response! I’ll try it when I get home. Not sure if it would move any because of how the screws are. Just wanting to see if anyone else that has replaced theirs looked like mine. Sent from my iPhone using Tapatalk |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G1 doesn't stop when pedal is released | Gas Yamaha | |||
Brake Pedal Stop Torn Up (Guys in the cart service industry, chime in!) | Electric Club Car | |||
G1 Stop Switch | Gas Yamaha | |||
Can I start and stop my vanguard with the pedal? | Big Block Talk! | |||
ST480 Workhorse won't stop running when gas pedal released | Gas EZGO |