|
03-10-2009, 09:08 PM
|
#1 |
|
Gone Wild
Join Date: Mar 2009
Posts: 256
|
D&D Torque Motors
Anybody have any experience with the D&D ES-58 18.7 HP 80lbs torque at 1450 rpm's? This is a high torque motor.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-10-2009, 11:24 PM
|
#2 |
|
Gone Wild
Join Date: Oct 2008
Location: Austin/Willis, Texas
Posts: 627
|
Re: D&D Torque Motors
do you have one? if so, how fast does your cart go and what size tires are on it?
|
|
|
|
|
03-11-2009, 12:21 AM
|
#3 |
|
Gone Wild
Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
Re: D&D Torque Motors
K-DAWG, I know D&D makes a good motor. If ya don't get a good response from the gang here, you can call D&D direct. They have a tech. named Vic.
Very smart fella...  |
|
|
|
|
03-11-2009, 05:06 AM
|
#4 |
|
Gone Wild
Join Date: Mar 2009
Posts: 256
|
No thats what I have but, I see so much talk on here about the beast motor and none on D&D. I was just wondering how it compared or how others liked there ES-58. I have a 500 amp axe. I can pull wheeliesabout a foot high from a dead stop and you can flip it over backwards if you pull a wheelie backing up. I run 19 MPH on my buddies Garmin GPS. My cart has a 6 inch spindle lift with 10 inch aluminum rims and 23 in sahara king tires.
Continuous Rating: EE 6.0 ft/lbs 80 amps 3800 rpm 4.3 hp Class H insulation Peak Power 68 ft/lb 500 amps 1450 rpm 18.7 hp Class H insulation |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| motors ? | Electric EZGO | |||
| motors ? | Electric EZGO | |||
| Anybody tried EMP motors? | Electric Club Car | |||
| Electric Torque vs Gas Torque | Electric Club Car | |||
Linear Mode
