09-26-2007, 07:25 AM | #1 |
Not Yet Wild
Join Date: Sep 2007
Posts: 46
|
Lift Kit
C.C. 96 Lift kit that has frame cut, I believe that some call it z kit...The part that extends the tie rod ball joint, who ever installed it there is a problem..The ball joint won't seat properly, it is a thin flat bar about 1/4" and does not have the taper for the ball joint to set in..How many manufactures are there for this type of lift, it is about 6 or 7" lift...I have a temporary fix for now but it needs to be done properly...The existing taper for the ball joint is about 3/8 to 1/2" bar, but that bar is no longer used for the ball joint and is extended with the kit.. Any ideas?
Mac |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2007, 01:36 PM | #2 |
Gone Wild
Join Date: Dec 2006
Location: The Dark Side
Posts: 676
|
Re: Lift Kit
I am not sure if front end parts are changed.I think that with the Z lift the fram just gets cut.Can you post a pic??
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G9 lift which one? | Lifted Golf Carts | |||
Lift kit | Gas Club Car | |||
Lift Kit | Lifted Golf Carts | |||
Used Lift Kit | Golf Carts and Parts |