03-05-2012, 05:30 PM | #1 |
Not Yet Wild
Join Date: Aug 2011
Location: Youngstown, FL
Posts: 5
|
Source for 341cc engine
Any vendor recommendations for replacement 341cc engines? The one I have in this 89 CC was rebuilt 8 years ago and it is shot...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-05-2012, 05:34 PM | #2 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Source for 341cc engine
thats a tough one and if you find one it won,t be cheap....................
|
03-05-2012, 05:49 PM | #3 |
Not Yet Wild
Join Date: Aug 2011
Location: Youngstown, FL
Posts: 5
|
Re: Source for 341cc engine
or do you know of another engine that would fit/could be adapted with a few modifications?
|
03-06-2012, 09:36 AM | #4 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Source for 341cc engine
yes the newer engine the fe-290 will fit but you,ll need to buy the kit to get it mounted right, you can even go big block like sno mobile or a big briggs it just will need modded a bit.............................
|
03-06-2012, 07:16 PM | #5 |
Gone Wild
Join Date: Mar 2010
Location: wolflake, indidana
Posts: 467
|
Re: Source for 341cc engine
it would be easy to put a clone in your cc. and lots cheaper.
|
03-06-2012, 08:19 PM | #6 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: Source for 341cc engine
We do a few Kawasaki FE290s and 350s You just have to drill a few holes mount your clutch and hook up throttle. Brand new motor, exhaust and cables you have about $900-975 in it
|
03-06-2012, 09:37 PM | #7 |
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 390
|
Re: Source for 341cc engine
You could put a Fe250 for 400.00 on ebay.
|
03-07-2012, 06:55 PM | #8 |
Not Yet Wild
Join Date: Apr 2011
Location: Holland NY
Posts: 20
|
Re: Source for 341cc engine
I have an 89 CC that had rod knock and needed a new engine. I bought a 15 hp Lifan from Home Depot, clutch adapter from CCP and a throttle cable kit from Affordable Go Carts, total cost $ 350.00. Reused my origional clutch, made a new motor mount plate and made a bracket to mount my starter/generator. The coversion is not too bad, I took my time to make mine the best I could using information on this site. Only thing I am waiting for is the throttle cable. Sounds like its very worthwhile considering the origional engine is only like 8.5 hp. Good luck
|
03-09-2012, 09:44 PM | #9 | |
Getting Wild
Join Date: Jun 2008
Location: western NY
Posts: 121
|
Re: Source for 341cc engine
Quote:
- Primarily I want to know if any of the motors don't require a lift kit? I'd rather leave it stock. - Do you run with the stock muffler? - Does anyone make a motor mount or is there a drawing posted for one of the motors? Thanks |
|
03-10-2012, 07:49 AM | #10 | |
Gone Wild
Join Date: Mar 2010
Location: wolflake, indidana
Posts: 467
|
Re: Source for 341cc engine
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
KF82 341cc parts | Golf Carts and Parts | |||
87` 341cc engine | Gas Club Car | |||
1990 341cc rod question | Gas Club Car | |||
used engine source | Gas Harley Davidson | |||
valve setting for 341cc engine | Gas Club Car |